| MATERIAL | STEEL BODY |
| STEEL SEAT |
| STEEL STEM |
| STEEL DISK |
| MATERIAL DOCUMENT AND CLASSIFICATION | A105,GRADE 2 ASSN STD SINGLE MATERIAL RESPONSE BODY |
| 66.AISI 410/SAE 51410 FED STD SINGLE MATERIAL RESPONSE STEM |
| VALVE SIZE | 2.500 INCHES |
| MAXIMUM OPERATING PRESSURE AND MEDIA FOR WHICH DESIGNED | 600.0 POUNDS PER SQUARE INCH STEAM |
| MAXIMUM OPERATING TEMP AND MEDIA FOR WHICH DESIGNED | 775.0 DEG FAHRENHEIT STEAM |
| VALVE OPERATION METHOD | MANUAL |
| INLET RELATIONSHIP WITH OUTLET | IDENTICAL |
| CONNECTION TYPE | FLANGE, ROUND W/HOLES |
| FLANGE DIAMETER | 7.500 INCHES |
| BOLT HOLE QUANTITY | 8 |
| FACE TO FACE DISTANCE | 13.000 INCHES |
| FLANGE FACE DESIGN | RAISED |
| STEM TYPE | RISING |
| BONNET TYPE | OUTSIDE SCREW-YOKE |
| BONNET ATTACHMENT METHOD | BOLTED |
| FURNISHED ITEMS AND QUANTITY | 1 HANDWHEEL |
| SPECIAL FEATURES | NON-ROTATING STEM ACHIEVES 50 PERCENT LOWER OPERATING TORQUE; LOW STEM HEAD REDUCES HT. AND WT. OF VALVE |
| TEST DATA DOCUMENT | 81349-MIL-S-901 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| NONDEFINITIVE SPEC/STD DATA | D COMPOSITION |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 81349 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-DTL-18110 |