4820-00-405-1766, VALVE,ANGLE

National Stock Number:
4820-00-405-1766

Federal Supply Class:
4820

National Item Identification Number:
004051766

Description:
VALVE,ANGLE

Detail:
A valve with one inlet and one outlet connection with outlet flow at an angle to inlet flow. The flow is controlled by the action of a stem which lifts disks perpendicularly off the center axis of its seat. It may be inline or cartridge (manifold) design. Excludes VALVE (1), Y; VALVE, STOP-CHECK; and COCK, SHUTOFF, SCREW STEM.

Manufacturer Information:

807-42CID-882003551	1GZ83	SFC VALVE CORPORATION
807-42CID-882003551	32373	SFC VALVE CORP
C413-1-B2	11859	HUNT VALVE COMPANY, INC.
C413-1-B2CID882003670	11859	HUNT VALVE COMPANY, INC.
81571-01 1/2	76364	MILWAUKEE VALVE CO, INC
81571-01-1/2INCID882003643	76364	MILWAUKEE VALVE CO, INC
CS4820-0014CKNRX	14959	CRANE CO DIV VALVE DIV
W03-3075B-02TS	57574	VELAN VALVE CORP.
W033075B02TS/33311-30H/882003638	57574	VELAN VALVE CORP.
MILV22094	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
CS4820-0014CKNRX	85130	FLOWSERVE CORPORATION DIV FLOWSERVE US INC

Techincal Specification:

BONNET ATTACHMENT METHOD	BOLTEDBOLTED
BONNET TYPE	OUTSIDE SCREW-YOKEOUTSIDE SCREW-YOKE
CONNECTION STYLE	SOCKET ALL ENDSSOCKET ALL ENDS
CONNECTION TYPE	UNTHREADED INTERNAL PIPE ALL ENDSUNTHREADED INTERNAL PIPE ALL ENDS
FEATURES PROVIDED	BONNET PACKINGBONNET PACKING
FLOW CONTROL DEVICE	DISKDISK
MATERIAL DOCUMENT AND CLASSIFICATION	ASTMA105,GRADE2 ASSN STD 1ST MATERIAL RESPONSE AND ASTMA105,GRADE2 ASSN STD 1ST MATERIAL RESPONSE AND MIL-R-17131,MIL-RC0CR-A MIL SPEC 2ND MATERIAL RESPONSE FLOW CONTROL DEVICEMIL-R-1713,MIL-RC0CR-A MIL SPEC 2ND MATERIAL RESPONSE SEAT
MATERIAL DOCUMENT AND CLASSIFICATION	ASTMA105,GRADE2 ASSN STD 1ST MATERIAL RESPONSE AND MIL-R-17131,MIL-RC0CR-A MIL SPEC 2ND MATERIAL RESPONSE FLOW CONTROL DEVICE
MATERIAL DOCUMENT AND CLASSIFICATION	ASTMA105,GRADE2 ASSN STD SINGLE MATERIAL RESPONSE BODYASTMA105,GRADE2 ASSN STD 1ST MATERIAL RESPONSE AND MIL-R-1713,MIL-RC0CR-A MIL SPEC 2ND MATERIAL RESPONSE SEAT
MATERIAL	STEEL CORROSION RESISTING STEM
MATERIAL	STEEL CORROSION RESISTING STEMSTEEL FLOW CONTROL DEVICE
MATERIAL	STEEL FLOW CONTROL DEVICESTEEL SEAT
MATERIAL	STEEL SEATSTEEL BODY
MAXIMUM OPERATING TEMP	775.0 FAHRENHEIT SINGLE RESPONSE775.0 FAHRENHEIT SINGLE RESPONSE
MEDIA FOR WHICH DESIGNED	STEAM SINGLE RESPONSE
NOMINAL PIPE SIZE ACCOMMODATED	0.500 INCHES ALL ENDS0.500 INCHES ALL ENDS
NONDEFINITIVE SPEC/STD DATA	D COMPOSITION
OPERATING PRESSURE	1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE
SPECIAL FEATURES	VALVE SIZE 0.500 IN.
VALVE OPERATION METHOD	MANUALMANUAL
STYLE DESIGNATOR	ANGLE
TEST DATA DOCUMENT	81349-MIL-S-901 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

Click here to Register for Free 30-day Trial