|
|
|
National Stock Number:
4820-00-375-7999
Federal Supply Class:
4820
National Item Identification Number:
003757999
Description:
VALVE,ANGLE
Detail:
A valve with one inlet and one outlet connection with outlet flow at an angle to inlet flow. The flow is controlled by the action of a stem which lifts disks perpendicularly off the center axis of its seat. It may be inline or cartridge (manifold) design. Excludes VALVE (1), Y; VALVE, STOP-CHECK; and COCK, SHUTOFF, SCREW STEM.
|
Manufacturer Information:
| 563-4825-932683ALT5PCV1 | 81316 | PORTSMOUTH NAVAL SHIPYARD | | SSS4824-935001 | 80064 | NAVAL SHIP SYSTEMS COMMAND |
|
Techincal Specification:
| BONNET ATTACHMENT METHOD | THREADED | | BONNET TYPE | INSIDE SCREW | | CONNECTION TYPE | FLANGE FIRST END | | CONNECTION TYPE | FLANGE SECOND END | | FEATURES PROVIDED | BONNET PACKING | | FIRST CONNECTION FACE TO CENTERLINE DISTANCE | 4.125 INCHES | | FLANGE FACE DESIGN | RAISED STRAIGHT FIRST END | | FLANGE FACE DESIGN | PLAIN SECOND END | | FLANGE SHAPE | ROUND FIRST END | | FLANGE SHAPE | ROUND SECOND END | | FLOW CONTROL DEVICE | DISK | | OPERATING PRESSURE | 350.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE | | MATERIAL | COPPER ALLOY 903 BODY | | MATERIAL | NICKEL ALLOY 400 FLOW CONTROL DEVICE | | MATERIAL | NICKEL ALLOY 400 STEM | | MATERIAL | NICKEL ALLOY 400 SEAT | | NOMINAL OUTSIDE DIAMETER | 3.813 INCHES SECOND END | | NOMINAL OUTSIDE DIAMETER | 4.313 INCHES FIRST END | | NOMINAL THICKNESS | 0.688 INCHES FIRST END | | NOMINAL THICKNESS | 0.688 INCHES SECOND END | | NONDEFINITIVE SPEC/STD DATA | A ASSEMBLY | | RAISED FACE NOMINAL HEIGHT | 1.875 INCHES FIRST END | | RENEWABLE SEAT RING TYPE | THREADED | | SECOND CONNECTION FACE TO CENTERLINE DISTANCE | 3.500 INCHES | | VALVE OPERATION METHOD | MANUAL | | VALVE SIZE | 0.750 INCHES | | STYLE DESIGNATOR | ANGLE FLANGED ENDS | | TEST DATA DOCUMENT | 80064-SS-S4824-935001 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|