|
|
|
National Stock Number:
4820-00-269-7220
Federal Supply Class:
4820
National Item Identification Number:
002697220
Description:
VALVE,ANGLE
Detail:
A valve with one inlet and one outlet connection with outlet flow at an angle to inlet flow. The flow is controlled by the action of a stem which lifts disks perpendicularly off the center axis of its seat. It may be inline or cartridge (manifold) design. Excludes VALVE (1), Y; VALVE, STOP-CHECK; and COCK, SHUTOFF, SCREW STEM.
|
Manufacturer Information:
| 60-12HF4 | 07097 | GRACO HIGH PRESSURE EQUIPMENT INC. |
|
Techincal Specification:
| MATERIAL | STEEL COMP 316 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 66,AISI 316/SAE 30316 FED STD SINGLE MATERIAL RESPONSE OVERALL | | STYLE DESIGNATOR | ANGLE | | FLOW CONTROL DEVICE | STEM OR | | DISK | | MAXIMUM OPERATING PRESSURE | 60000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | VALVE OPERATION METHOD | MANUAL | | CONNECTION TYPE | THREADED INTERNAL TUBE ALL ENDS | | CONNECTION STYLE | HIGH PRESSURE FLARE(TUBE) ALL ENDS | | SEAT ANGLE | 12.5 DEGREES ALL ENDS | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.250 INCHES ALL ENDS | | THREAD SERIES DESIGNATOR | UNF ALL ENDS | | NOMINAL THREAD SIZE | 0.562 INCHES ALL ENDS | | THREAD CLASS | 2A ALL ENDS | | THREAD DIRECTION | RIGHT-HAND 1ST END | | BONNET TYPE | INSIDE SCREW | | BONNET ATTACHMENT METHOD | INTEGRAL | | SPECIAL FEATURES | VALVE SIZE 1/4 IN. |
|
|