|
|
|
National Stock Number:
4820-00-243-8180
Federal Supply Class:
4820
National Item Identification Number:
002438180
Description:
VALVE,GLOBE
Detail:
A valve with one inlet and one outlet connection with outlet flow parallel to inlet flow. The flow is controlled by the action of a stem which lifts the disk perpendicularly off the center axis of its seat. The stem is at a 90 degree (1.5708 radians) angle to axis of flow. Excludes VALVE, STOP-CHECK; COCK, SHUTOFF, SCREW STEM; and VALVE, SOLENOID.
|
Manufacturer Information:
| 301543-1 | 56190 | METADURE PARTS & SALES, INC. |
|
Techincal Specification:
| MATERIAL | STEEL CORROSION RESISTING OVERALL | | SURFACE TREATMENT | PASSIVATE | | STYLE DESIGNATOR | STRAIGHT THRU | | FLOW CONTROL DEVICE | NEEDLE | | VALVE OPERATION METHOD | MANUAL | | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END | | THREADED INTERNAL PIPE 2ND END | | CONNECTION STYLE | FLARE(TUBE) 1ST END | | PLAIN,OPTIONAL END(PIPE) 2ND END | | SEAT ANGLE | 45.0 DEGREES 1ST END | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.375 INCHES 1ST END | | THREAD SERIES DESIGNATOR | UNJF 1ST END | | NPT 2ND END | | NOMINAL THREAD SIZE | 0.562 INCHES 1ST END | | 0.250 INCHES 2ND END | | THREAD CLASS | 3B 1ST END | | THREAD DIRECTION | RIGHT-HAND 1ST END | | RIGHT-HAND 2ND END | | BONNET TYPE | INSIDE SCREW | | BONNET ATTACHMENT METHOD | THREADED | | SPECIAL FEATURES | PANEL MOUNTED | | TEST DATA DOCUMENT | 56190-103457 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|