|
|
|
National Stock Number:
4820-00-226-1580
Federal Supply Class:
4820
National Item Identification Number:
002261580
Description:
VALVE,ANGLE
Detail:
A valve with one inlet and one outlet connection with outlet flow at an angle to inlet flow. The flow is controlled by the action of a stem which lifts disks perpendicularly off the center axis of its seat. It may be inline or cartridge (manifold) design. Excludes VALVE (1), Y; VALVE, STOP-CHECK; and COCK, SHUTOFF, SCREW STEM.
|
Manufacturer Information:
| MILV22854 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS17243 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS17243-4 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BONNET TYPE | INSIDE SCREW | | BONNET ATTACHMENT METHOD | THREADED | | CONNECTION STYLE | FLARED (TUBE) FIRST END | | CONNECTION STYLE | PLAIN (PIPE) SECOND END | | CONNECTION TYPE | THREADED EXTERNAL PIPE SECOND END | | CONNECTION TYPE | THREADED EXTERNAL TUBE FIRST END | | FLOW CONTROL DEVICE | DISK | | OPERATING PRESSURE | 350.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE | | MATERIAL | COPPER ALLOY OR STEEL BODY | | MATERIAL | COPPER ALLOY OR STEEL STEM | | MATERIAL | STEEL CORROSION RESISTING SEAT | | MAXIMUM OPERATING TEMP | 200.0 FAHRENHEIT SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | REFRIGERANT 12 SINGLE RESPONSE | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.500 INCHES FIRST END | | NOMINAL PIPE SIZE ACCOMMODATED | 0.500 INCHES SECOND END | | NOMINAL THREAD SIZE | 0.500 INCHES SECOND END | | NOMINAL THREAD SIZE | 0.750 INCHES FIRST END | | SEAT ANGLE | 45.0 DEGREES FIRST END | | VALVE OPERATION METHOD | MANUAL | | STYLE DESIGNATOR | ANGLE | | SURFACE TREATMENT | PASSIVATE | | THREAD CLASS | 2A FIRST END | | THREAD DIRECTION | RIGHT-HAND FIRST END | | THREAD DIRECTION | RIGHT-HAND SECOND END | | THREAD SERIES DESIGNATOR | NPTF SECOND END | | THREAD SERIES DESIGNATOR | UNF FIRST END |
|