| CONNECTION STYLE | FLARED (TUBE) FIRST END |
| CONNECTION STYLE | FLARED (TUBE) SECOND END |
| DISK LOADING METHOD | SPRING |
| FLOW CONTROL DEVICE | POPPET |
| OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6, ALLOY 2024, T4 FED SPEC SINGLE MATERIAL RESPONSE BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6, ALLOY 2024, T4 FED SPEC SINGLE MATERIAL RESPONSE SEAT |
| MATERIAL | ALUMINUM ALLOY BODY |
| MATERIAL | ALUMINUM ALLOY SEAT |
| MATERIAL | STEEL COMP 440A FLOW CONTROL DEVICE |
| MAXIMUM OPERATING TEMP | -65.0 FAHRENHEIT FIRST RESPONSE |
| MAXIMUM OPERATING TEMP | 275.0 FAHRENHEIT SECOND RESPONSE |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID, PHOSPHATE-ESTER BASE SINGLE RESPONSE |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.250 INCHES SECOND END |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.375 INCHES FIRST END |
| NOMINAL THREAD SIZE | 0.438 INCHES SECOND END |
| NOMINAL THREAD SIZE | 0.562 INCHES FIRST END |
| SEAT ANGLE | 37.0 DEGREES SECOND END |
| SEAT ANGLE | 37.0 DEGREES FIRST END |
| VALVE OPERATION METHOD | AUTOMATIC |
| STYLE DESIGNATOR | STRAIGHT THRU |
| SURFACE TREATMENT | ANODIZE |
| THREAD CLASS | 3A FIRST END |
| THREAD CLASS | 3A SECOND END |
| THREAD DIRECTION | RIGHT-HAND FIRST END |
| THREAD DIRECTION | RIGHT-HAND SECOND END |
| THREAD SERIES DESIGNATOR | UNF FIRST END |
| THREAD SERIES DESIGNATOR | UNF SECOND END |
| THREAD QUANTITY PER INCH | 18 FIRST END |
| THREAD QUANTITY PER INCH | 20 SECOND END |