|
|
|
National Stock Number:
4820-00-045-5792
Federal Supply Class:
4820
National Item Identification Number:
000455792
Description:
VALVE,ANGLE
Detail:
A valve with one inlet and one outlet connection with outlet flow at an angle to inlet flow. The flow is controlled by the action of a stem which lifts disks perpendicularly off the center axis of its seat. It may be inline or cartridge (manifold) design. Excludes VALVE (1), Y; VALVE, STOP-CHECK; and COCK, SHUTOFF, SCREW STEM.
|
Manufacturer Information:
| 2620-902X6ASSYD1-4 | 63686 | THE WALWORTH COMPANY | | 2620-902X6ASSYD1-4 | 96169 | ELECTRIC BOAT CORPORATION | | 2621-902ASSYIDS1-4INL1 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | 2621-902ASSYIDS1-4IN | 63686 | THE WALWORTH COMPANY | | 845-1889568ASSYD1-4IN | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 2621-902ASSYIDS1-4IN | 96169 | ELECTRIC BOAT CORPORATION | | 845-1889568ASSYD1-4INL1 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG |
|
Techincal Specification:
| BONNET TYPE | INSIDE SCREW | | BONNET ATTACHMENT METHOD | THREADED | | CONNECTION STYLE | SOCKET WITH BRAZING RING FIRST END | | CRITICALITY CODE JUSTIFICATION | ZZZY | | FEATURES PROVIDED | BONNET PACKING | | FLOW CONTROL DEVICE | DISK | | OPERATING PRESSURE | 700.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE | | MATERIAL | COPPER ALLOY 922 BODY | | MATERIAL | NICKEL ALLOY R-405 FLOW CONTROL DEVICE | | MATERIAL | NICKEL ALLOY R-405 SEAT | | MATERIAL | NICKEL ALLOY R-405 STEM | | MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS SINGLE RESPONSE | | NOMINAL PIPE SIZE ACCOMMODATED | 0.250 INCHES FIRST END | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | QUALITY CONTROL IAW NAVSHIPS 0948-045-7010 MATERIAL IDENTIFICATION AND CONTROL INSTRUCTION FOR LEVEL 1 ITEMS | | RENEWABLE SEAT RING TYPE | THREADED | | VALVE OPERATION METHOD | MANUAL | | STYLE DESIGNATOR | ANGLE | | TEST DATA DOCUMENT | 96169-2620-902X6ASSYD1-4 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|