|
|
|
National Stock Number:
4810-01-503-8733
Federal Supply Class:
4810
National Item Identification Number:
015038733
Description:
VALVE,SOLENOID
Detail:
A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see VALVE (1), LINEAR, DIRECTIONAL CONTROL. It may be inline or cartridge (manifold) design. Excludes VALVE (1), BUTTERFLY.
|
Manufacturer Information:
| 203101-000 | 95408 | HOTSTART SALES, LLC | | 24FS4C2380AAF4C05 | 81978 | PARKER-HANNIFIN CORPORATION | | GR24FS4C2380AAF-4C0S | 81978 | PARKER-HANNIFIN CORPORATION | | PRP 203101-000 | 95408 | HOTSTART SALES, LLC | | A-4136-1 ITEM 17 | 95408 | HOTSTART SALES, LLC |
|
Techincal Specification:
| MATERIAL | COPPER ALLOY BODY | | STYLE DESIGNATOR | STRAIGHT THRU | | FLOW CONTROL DEVICE | DIAPHRAGM | | MEDIA FOR WHICH DESIGNED | STEAM SINGLE RESPONSE | | MAXIMUM OPERATING PRESSURE | 150.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MAXIMUM OPERATING TEMP | 353.0 DEG FAHRENHEIT SINGLE RESPONSE | | VALVE OPERATION METHOD | SOLENOID | | VOLTAGE IN VOLTS AND CURRENT TYPE | 110.0 AC | | FLOW CONTROL DEVICE NORMAL OPERATION POSITION | CLOSED | | CONNECTION TYPE | THREADED INTERNAL PIPE ALL ENDS | | CONNECTION STYLE | PLAIN,OPTIONAL END(PIPE) ALL ENDS | | THREAD SERIES DESIGNATOR | NPT ALL ENDS | | NOMINAL THREAD SIZE | 1.500 INCHES ALL ENDS | | THREAD QUANTITY PER INCH | 11-1/2 ALL ENDS | | THREAD CLASS | 2 ALL ENDS | | MOUNTING POSITION | HORIZONTAL OR | | VERTICAL | | SPECIAL FEATURES | SOLENOID VALVE IS RATED GENERAL PURPOSE, HOT WATER/STEAM WITH HIGH TEMP. PTFE SEALS 2 WAY, N/C, W/1-1/2 INCH. NPT PORTS, 110 VAC. 7000 SERIES 2 WAY VALVES. THIS VALVE IS DESIGNED TO BE MULTI-POISED AND SO WILL PERFORM PROPERLY WHEN MOUNTED IN ANY POSITION. HOWEVER, FOR OPTIMUM LIFE AND PERFORMANCE, THE VALVE SHOULD BE MOUNTED VERTICALLY UPRIGHT SO AS TO MINIMIZE WEAR AND REDUCE THE POSSIBILITY OF FOREIGN MATTER ACCUMULATING INSIDE THE SLEEVE AREA. | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SOLENOID VALVE |
|
|