|
|
|
National Stock Number:
4810-01-273-1292
Federal Supply Class:
4810
National Item Identification Number:
012731292
Description:
VALVE,SOLENOID
Detail:
A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see VALVE (1), LINEAR, DIRECTIONAL CONTROL. It may be inline or cartridge (manifold) design. Excludes VALVE (1), BUTTERFLY.
|
Manufacturer Information:
| HT8210D9 110/50,120/60 | 04845 | AUTOMATIC SWITCH COMPANY |
|
Techincal Specification:
| MATERIAL | COPPER ALLOY BODY | | PLASTIC POLYTETRAFLUOROETHYLENE OR | | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEAT | | STYLE DESIGNATOR | STRAIGHT THRU | | FLOW CONTROL DEVICE | DISK | | MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS SINGLE RESPONSE | | MAXIMUM OPERATING PRESSURE | 125.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MAXIMUM OPERATING TEMP | 180.0 DEG FAHRENHEIT SINGLE RESPONSE | | VALVE OPERATION METHOD | SOLENOID | | VOLTAGE IN VOLTS AND CURRENT TYPE | 110.0 AC AND | | 120.0 AC | | FREQUENCY IN HERTZ | 50.0 AND | | 60.0 | | PHASE | SINGLE | | CURRENT RATING IN AMPS | 0.050 | | FLOW CONTROL DEVICE NORMAL OPERATION POSITION | CLOSED | | CONNECTION TYPE | THREADED INTERNAL PIPE ALL ENDS | | CONNECTION STYLE | PLAIN,OPTIONAL END(PIPE) ALL ENDS | | THREAD SERIES DESIGNATOR | NPT ALL ENDS | | NOMINAL THREAD SIZE | 0.750 INCHES ALL ENDS | | THREAD DIRECTION | RIGHT-HAND ALL ENDS | | MOUNTING POSITION | HORIZONTAL OR | | VERTICAL |
|
|