|
|
|
National Stock Number:
4810-01-251-4645
Federal Supply Class:
4810
National Item Identification Number:
012514645
Description:
DIAPHRAGM,ACTUATOR VALVE,SPECIAL
Detail:
An item constructed of one or more layers of thin flexible material, either laminated or separated, designed to form a tight seal between the chambers of a valve, and to transmit pressure inducted motion to a valve disk either directly or through a mechanical linkage. The surface of the item must be formed or molded to have a beaded or rolled edge, ribs or any other raised surfaces. The item may contain bolt holes and/or center holes. Excludes DIAPHRA GM, VALVE, FLAT and GASKET.
|
Manufacturer Information:
| 3-162-100-CVF-1 | 01170 | BELLOFRAM CORPORATION | | 82606-1 | 07148 | UNITED TECHNOLOGIES CORP HAMILTON SUNDSTRAND CORP | | 82606-1 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| CENTER HOLE DIAMETER | 0.180 INCHES NOMINAL | | FSC APPLICATION DATA | 11292-1 VALVE,AIR;TEMP AND PRESSURE CONTROLS,AIRCRAFT | | OUTSIDE DIAMETER | 1.620 INCHES NOMINAL | | OVERALL HEIGHT | 1.000 INCHES NOMINAL | | MATERIAL THICKNESS | 0.014 INCHES MINIMUM AND 0.020 INCHES MAXIMUM | | MATERIAL | PLASTIC | | MEDIA FOR WHICH DESIGNED | AIR | | PRESSURE RATING | 0.0 POUNDS PER SQUARE INCH (PSI) MINIMUM AND 20.5 POUNDS PER SQUARE INCH (PSI) MAXIMUM | | SHANK DIAMETER | 1.440 INCHES NOMINAL | | SPECIAL FEATURES | MATL IS NOMEX(BY DUPONT),A PLASTIC ARAMID IMPREGNATED WITH TYPE F FLUOROSILICONE;PROOF PRESSURE 112 PSIG AT 400 DEG F;BURST PRESSURE 118 PSIG AT 400 DEG F | | STYLE DESIGNATOR | SPECIAL SHAPED | | TEMP RATING | -65.0 FAHRENHEIT MINIMUM AND 400.0 FAHRENHEIT MAXIMUM |
|
|