|
|
|
National Stock Number:
4810-00-894-1309
Federal Supply Class:
4810
National Item Identification Number:
008941309
Description:
VALVE,SOLENOID
Detail:
A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see VALVE (1), LINEAR, DIRECTIONAL CONTROL. It may be inline or cartridge (manifold) design. Excludes VALVE (1), BUTTERFLY.
|
Manufacturer Information:
| 71215SN2KN00N0C111P3 | 81978 | PARKER-HANNIFIN CORPORATION | | V52DB2125 | 81978 | PARKER-HANNIFIN CORPORATION | | V52DB2125-120-60 | 81978 | PARKER-HANNIFIN CORPORATION |
|
Techincal Specification:
| APERTURE DIAMETER | 0.093 INCHES NOMINAL | | CONNECTION STYLE | PLAIN,OPTIONAL END(PIPE) ALL ENDS | | CURRENT RATING IN AMPS | 0.100 AND 0.090 | | FLOW CONTROL DEVICE | PISTON | | FREQUENCY IN HERTZ | 50.0 AND 60.0 | | INLET/OUTLET OPERATING PRESSURE DIFFERENTIAL | 125.0 POUNDS PER SQUARE INCH NOMINAL | | OPERATING PRESSURE | 125.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE | | MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER SYNTHETIC SEAT | | MATERIAL | STEEL BODY | | MATERIAL | STEEL BODY LINING | | MATERIAL | STEEL CORROSION RESISTING FLOW CONTROL DEVICE | | MEDIA FOR WHICH DESIGNED | ACETYLENE FIRST RESPONSE | | MEDIA FOR WHICH DESIGNED | AIR SECOND RESPONSE | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON THIRD RESPONSE | | MEDIA FOR WHICH DESIGNED | OXYGEN, GASEOUS FOURTH RESPONSE | | MEDIA FOR WHICH DESIGNED | WATER, FRESH FIFTH RESPONSE | | NOMINAL THREAD SIZE | 0.250 INCHES ALL ENDS | | PHASE | SINGLE | | VALVE OPERATION METHOD | SOLENOID | | VOLTAGE IN VOLTS AND CURRENT TYPE | 110.0 AC AND 120.0 AC | | STYLE DESIGNATOR | STRAIGHT THRU | | SURFACE TREATMENT | CADMIUM | | THREAD DIRECTION | RIGHT-HAND ALL ENDS | | THREAD SERIES DESIGNATOR | NPT ALL ENDS |
|
|