|
|
|
National Stock Number:
4810-00-891-4461
Federal Supply Class:
4810
National Item Identification Number:
008914461
Description:
VALVE,SOLENOID
Detail:
A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see VALVE (1), LINEAR, DIRECTIONAL CONTROL. It may be inline or cartridge (manifold) design. Excludes VALVE (1), BUTTERFLY.
|
Manufacturer Information:
| 10214892 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| MATERIAL | STEEL CORROSION RESISTING BODY | | PLASTIC POLYCHLOROTRIFLUOROETHYLENE SEAT | | SURFACE TREATMENT | PASSIVATE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171,FINISH5.4.1 MIL STD SINGLE TREATMENT RESPONSE | | STYLE DESIGNATOR | STRAIGHT THRU | | FLOW CONTROL DEVICE | DISK | | MEDIA FOR WHICH DESIGNED | AIR 1ST RESPONSE | | NITROGEN, LIQUID 2ND RESPONSE | | MAXIMUM OPERATING TEMP | 125.0 DEG FAHRENHEIT SINGLE RESPONSE | | VALVE OPERATION METHOD | SOLENOID | | VOLTAGE IN VOLTS AND CURRENT TYPE | 18.0 DC AND | | 30.0 DC | | CURRENT RATING IN AMPS | 1.000 | | FLOW CONTROL DEVICE NORMAL OPERATION POSITION | CLOSED | | CONNECTION TYPE | THREADED INTERNAL TUBE ALL ENDS | | CONNECTION STYLE | FLARE(TUBE) ALL ENDS | | SEAT ANGLE | 60.0 DEGREES ALL ENDS | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.250 INCHES ALL ENDS | | THREAD SERIES DESIGNATOR | UNF ALL ENDS | | NOMINAL THREAD SIZE | 0.437 INCHES ALL ENDS | | THREAD QUANTITY PER INCH | 20 ALL ENDS | | THREAD CLASS | 3B ALL ENDS | | THREAD DIRECTION | RIGHT-HAND ALL ENDS | | APERTURE DIAMETER | 0.120 INCHES NOMINAL | | MOUNTING POSITION | HORIZONTAL OR | | VERTICAL | | TEST DATA DOCUMENT | 18876-10214892 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|