|
|
|
National Stock Number:
4810-00-886-3044
Federal Supply Class:
4810
National Item Identification Number:
008863044
Description:
VALVE,SOLENOID
Detail:
A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see VALVE (1), LINEAR, DIRECTIONAL CONTROL. It may be inline or cartridge (manifold) design. Excludes VALVE (1), BUTTERFLY.
|
Manufacturer Information:
| 9194240 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | H60G0213 | 45681 | PARKER-HANNIFIN CORPORATION | | MIL-V-5529 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | H60G0213 | 92003 | PARKER HANNIFIN CORPORATION DIV AEROSPACE GROUP HEADQUARTERS |
|
Techincal Specification:
| CONNECTION STYLE | GASKET SEAL(BOSS) FIRST END | | CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END | | CURRENT RATING IN AMPS | 29.000 | | FLOW CONTROL DEVICE NORMAL OPERATION POSITION | OPEN | | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID, PHOSPHATE-ESTER BASE SINGLE RESPONSE | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.625 INCHES FIRST END | | NOMINAL THREAD SIZE | 0.875 INCHES FIRST END | | OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE | | SEAT ANGLE | 60.0 DEGREES FIRST END | | VALVE OPERATION METHOD | SOLENOID | | VOLTAGE IN VOLTS AND CURRENT TYPE | 29.0 DC | | STYLE DESIGNATOR | STRAIGHT THRU W/OFFSET | | TEST DATA DOCUMENT | 18876-9194240 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | THREAD CLASS | 3B FIRST END | | THREAD DIRECTION | RIGHT-HAND FIRST END | | THREAD QUANTITY PER INCH | 14 FIRST END | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) FIRST END |
|
|