|
|
|
National Stock Number:
4810-00-821-0609
Federal Supply Class:
4810
National Item Identification Number:
008210609
Description:
VALVE,GLOBE
Detail:
A valve with one inlet and one outlet connection with outlet flow parallel to inlet flow. The flow is controlled by the action of a stem which lifts the disk perpendicularly off the center axis of its seat. The stem is at a 90 degree (1.5708 radians) angle to axis of flow. Excludes VALVE, STOP-CHECK; COCK, SHUTOFF, SCREW STEM; and VALVE, SOLENOID.
|
Manufacturer Information:
| D53X 3-4IN | 71342 | IMI CASH VALVE INC |
|
Techincal Specification:
| BONNET ATTACHMENT METHOD | THREADED | | BONNET TYPE | INSIDE SCREW | | CONNECTION STYLE | PLAIN,OPTIONAL END(PIPE) ALL ENDS | | CONNECTION TYPE | THREADED INTERNAL PIPE ALL ENDS | | FLOW CONTROL DEVICE | DISK | | OPERATING PRESSURE | 250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE | | MATERIAL | COPPER ALLOY BODY | | MATERIAL | COPPER ALLOY SEAT | | MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR FLOW CONTROL DEVICE | | MAXIMUM OPERATING TEMP | 200.0 FAHRENHEIT SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS SINGLE RESPONSE | | NOMINAL THREAD SIZE | 0.750 INCHES ALL ENDS | | SPECIAL FEATURES | NORMALLY CLOSED POSITION,20 PSI PRESSURE REQUIRED TO OPEN VALVE,RENEWABLE CHROM-PLATED VALVE SEAT,LINE FLOW IS CONTROLLED BY APPLICATION OF INDEPENDENT AIR PRESSURE APPLIED TO THE DIAPHRAGM THROUGH A 0.125 IN. NPT THD INTERNAL AIR INLET | | VALVE OPERATION METHOD | AIR | | STYLE DESIGNATOR | STRAIGHT THRU | | THREAD DIRECTION | RIGHT-HAND ALL ENDS | | THREAD SERIES DESIGNATOR | NPT ALL ENDS |
|
|