|
|
|
National Stock Number:
4810-00-725-7743
Federal Supply Class:
4810
National Item Identification Number:
007257743
Description:
VALVE,SOLENOID
Detail:
A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see VALVE (1), LINEAR, DIRECTIONAL CONTROL. It may be inline or cartridge (manifold) design. Excludes VALVE (1), BUTTERFLY.
|
Manufacturer Information:
| 103754 | 01359 | TRIUMPH THERMAL SYSTEMS - MARYLAND, INC. | | AF77C46 | 70236 | TACTAIR FLUID CONTROLS INC | | AF77C46 | 99215 | KAISER FLUID TECHNOLOGIES INC. |
|
Techincal Specification:
| APERTURE DIAMETER | 0.040 INCHES MINIMUM AND 0.065 INCHES MAXIMUM | | FLOW CONTROL DEVICE | DISK | | OPERATING PRESSURE | 110.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE | | MATERIAL | STEEL CORROSION RESISTING BODY | | MATERIAL | STEEL CORROSION RESISTING FLOW CONTROL DEVICE | | MAXIMUM OPERATING TEMP | 450.0 FAHRENHEIT SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | WATER, FRESH SINGLE RESPONSE | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.250 INCHES FIRST END | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.250 INCHES SECOND END | | NOMINAL THREAD SIZE | 0.437 INCHES FIRST END | | NOMINAL THREAD SIZE | 0.438 INCHES SECOND END | | SEAT ANGLE | 45.0 DEGREES SECOND END | | VALVE OPERATION METHOD | SOLENOID | | VOLTAGE IN VOLTS AND CURRENT TYPE | 17.0 DC AND 30.0 DC | | STYLE DESIGNATOR | STRAIGHT THRU | | THREAD CLASS | 3A SECOND END | | THREAD CLASS | 3B FIRST END | | THREAD DIRECTION | RIGHT-HAND FIRST END | | THREAD DIRECTION | RIGHT-HAND SECOND END | | THREAD QUANTITY PER INCH | 20 FIRST END | | THREAD QUANTITY PER INCH | 20 SECOND END | | THREAD SERIES DESIGNATOR | UNF FIRST END | | THREAD SERIES DESIGNATOR | UNF SECOND END |
|
|