4810-00-612-5732, VALVE,SOLENOID

National Stock Number:
4810-00-612-5732

Federal Supply Class:
4810

National Item Identification Number:
006125732

Description:
VALVE,SOLENOID

Detail:
A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see VALVE (1), LINEAR, DIRECTIONAL CONTROL. It may be inline or cartridge (manifold) design. Excludes VALVE (1), BUTTERFLY.

Manufacturer Information:

65356	05721	NEWINGTON ELECTRIC CO., INC.
65356	33867	OCEANETICS INC
65356PCALL	05721	NEWINGTON ELECTRIC CO., INC.
V5D3550	81978	PARKER-HANNIFIN CORPORATION
V5L18360	81978	PARKER-HANNIFIN CORPORATION

Techincal Specification:

APERTURE DIAMETER	0.062 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
CONNECTION TYPE	THREADED INTERNAL PIPE ALL ENDS
CONNECTION STYLE	PLAIN,OPTIONAL END(PIPE) ALL ENDS
CURRENT RATING IN AMPS	0.261
FLOW CONTROL DEVICE NORMAL OPERATION POSITION	OPEN
FLOW CONTROL DEVICE	DISK
FREQUENCY IN HERTZ	60.0
INLET/OUTLET OPERATING PRESSURE DIFFERENTIAL	100.0 POUNDS PER SQUARE INCH NOMINAL
MATERIAL	STEEL CORROSION RESISTING BODY
MATERIAL	STEEL CORROSION RESISTING FLOW CONTROL DEVICE
MAXIMUM OPERATING PRESSURE	100.0 POUNDS PER SQUARE INCH SINGLE RESPONSE
MEDIA FOR WHICH DESIGNED	WATER-OIL-GAS SINGLE RESPONSE
MOUNTING POSITION	HORIZONTAL OR VERTICAL
NOMINAL THREAD SIZE	0.125 INCHES ALL ENDS
PHASE	THREE
STYLE DESIGNATOR	STRAIGHT THRU
THREAD DIRECTION	RIGHT-HAND ALL ENDS
THREAD SERIES DESIGNATOR	NPT ALL ENDS
VALVE OPERATION METHOD	SOLENOID
VOLTAGE IN VOLTS AND CURRENT TYPE	115.0 AC

Click here to Register for Free 30-day Trial