|
|
|
National Stock Number:
4810-00-529-4316
Federal Supply Class:
4810
National Item Identification Number:
005294316
Description:
VALVE,SOLENOID
Detail:
A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see VALVE (1), LINEAR, DIRECTIONAL CONTROL. It may be inline or cartridge (manifold) design. Excludes VALVE (1), BUTTERFLY.
|
Manufacturer Information:
| 25400-8 | 81982 | HYDRO-AIRE AEROSPACE CORP |
|
Techincal Specification:
| MATERIAL | ALUMINUM ALLOY BODY | | ALUMINUM ALLOY SEAT | | SURFACE TREATMENT | ANODIZE | | STYLE DESIGNATOR | STRAIGHT THRU W/OFFSET | | OFFSET DISTANCE | 0.625 INCHES | | FLOW CONTROL DEVICE | PISTON | | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID, MINERAL BASE SINGLE RESPONSE | | MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | VOLTAGE IN VOLTS AND CURRENT TYPE | 18.0 DC AND | | 28.5 DC | | FLOW CONTROL DEVICE NORMAL OPERATION POSITION | OPEN | | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END | | CONNECTION STYLE | INVERTED FLARE(TUBE) 1ST END | | SEAT ANGLE | 60.0 DEGREES 1ST END | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.500 INCHES 1ST END | | THREAD SERIES DESIGNATOR | UNF 1ST END | | NOMINAL THREAD SIZE | 0.750 INCHES 1ST END | | THREAD QUANTITY PER INCH | 16 1ST END | | THREAD CLASS | 3B 1ST END | | THREAD DIRECTION | RIGHT-HAND 1ST END | | APERTURE DIAMETER | 0.500 INCHES NOMINAL | | MOUNTING POSITION | HORIZONTAL OR | | VERTICAL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 81982 | | DESIGN CONTROL REFERENCE | 25400-8 |
|
|