|
|
|
National Stock Number:
4810-00-487-2775
Federal Supply Class:
4810
National Item Identification Number:
004872775
Description:
VALVE,SOLENOID
Detail:
A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see VALVE (1), LINEAR, DIRECTIONAL CONTROL. It may be inline or cartridge (manifold) design. Excludes VALVE (1), BUTTERFLY.
|
Manufacturer Information:
| 11668627 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 11684125 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | V5-55680 | 81978 | PARKER-HANNIFIN CORPORATION | | 4810PL2194830 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 4810004872775 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 4810004872775 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | V5S55680 | 81978 | PARKER-HANNIFIN CORPORATION | | V5S55680D5CA2H | 81978 | PARKER-HANNIFIN CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL CORROSION RESISTING BODY | | STEEL CORROSION RESISTING FLOW CONTROL DEVICE | | STYLE DESIGNATOR | CROSS | | FLOW CONTROL DEVICE | DISK | | MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS SINGLE RESPONSE | | MAXIMUM OPERATING PRESSURE | 70.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | VALVE OPERATION METHOD | SOLENOID | | VOLTAGE IN VOLTS AND CURRENT TYPE | 13.0 DC | | CURRENT RATING IN AMPS | 2.000 | | FLOW CONTROL DEVICE NORMAL OPERATION POSITION | CLOSED | | INLET/OUTLET OPERATING PRESSURE DIFFERENTIAL | 70.0 POUNDS PER SQUARE INCH NOMINAL | | CONNECTION TYPE | THREADED INTERNAL PIPE ALL ENDS | | CONNECTION STYLE | PLAIN,OPTIONAL END(PIPE) ALL ENDS | | THREAD SERIES DESIGNATOR | NPT ALL ENDS | | NOMINAL THREAD SIZE | 0.250 INCHES ALL ENDS | | THREAD DIRECTION | RIGHT-HAND ALL ENDS | | APERTURE DIAMETER | 0.156 INCHES NOMINAL | | MOUNTING POSITION | HORIZONTAL OR | | VERTICAL |
|
|