|
|
|
National Stock Number:
4810-00-339-2373
Federal Supply Class:
4810
National Item Identification Number:
003392373
Description:
VALVE,SOLENOID
Detail:
A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see VALVE (1), LINEAR, DIRECTIONAL CONTROL. It may be inline or cartridge (manifold) design. Excludes VALVE (1), BUTTERFLY.
|
Manufacturer Information:
| 310488-7 | 59364 | HONEYWELL INTERNATIONAL INC. | | 310488-7 | 70210 | HONEYWELL INTERNATIONAL INC. | | SVD478-7 | 04320 | CURTISS-WRIGHT CONTROLS INTEGRATED SENSING, INC. | | 310488-7 | 72599 | ALLIEDSIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO | | 310488-7 | 99193 | HONEYWELL INTERNATIONAL INC. | | SVD478-7 | 99743 | IMC MAGNETICS CORP WESTERN DIV |
|
Techincal Specification:
| MATERIAL | STEEL BODY | | STEEL CORROSION RESISTING FLOW CONTROL DEVICE | | SURFACE TREATMENT | CADMIUM | | STYLE DESIGNATOR | ANGLE | | FLOW CONTROL DEVICE | NEEDLE | | MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS SINGLE RESPONSE | | MAXIMUM OPERATING PRESSURE | 40.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | VALVE OPERATION METHOD | SOLENOID | | VOLTAGE IN VOLTS AND CURRENT TYPE | 30.0 DC | | CURRENT RATING IN AMPS | 0.590 | | FLOW CONTROL DEVICE NORMAL OPERATION POSITION | CLOSED | | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END | | FLANGE 2ND END | | CONNECTION STYLE | PLAIN (TUBE) 1ST END | | FLANGE SHAPE | TRIANGULAR WITH HOLES 2ND END | | NOMINAL THICKNESS | 0.078 INCHES 2ND END | | NOMINAL LENGTH | 1.359 INCHES 2ND END | | NOMINAL WIDTH | 1.438 INCHES 2ND END | | BOLT HOLE QUANTITY | 5 2ND END | | BOLT HOLE NOMINAL DIAMETER | 0.156 INCHES 2ND END | | BOLT CIRCLE NOMINAL DIAMETER | 1.125 INCHES 2ND END | | FLANGE FACE DESIGN | PLAIN 2ND END | | THREAD SERIES DESIGNATOR | UNEF 1ST END | | NOMINAL THREAD SIZE | 0.625 INCHES 1ST END | | THREAD CLASS | 2A 1ST END | | THREAD DIRECTION | RIGHT-HAND 1ST END | | APERTURE DIAMETER | 1.125 INCHES NOMINAL | | MOUNTING POSITION | HORIZONTAL OR | | VERTICAL |
|
|