| MATERIAL | ALUMINUM ALLOY BODY |
| STEEL CORROSION RESISTING FLOW CONTROL DEVICE |
| STEEL CORROSION RESISTING SEAT |
| STYLE DESIGNATOR | STRAIGHT THRU |
| FLOW CONTROL DEVICE | POPPET |
| VALVE OPERATION METHOD | SOLENOID |
| VOLTAGE IN VOLTS AND CURRENT TYPE | 18.0 DC AND |
| 30.0 DC |
| CURRENT RATING IN AMPS | 1.000 |
| FLOW CONTROL DEVICE NORMAL OPERATION POSITION | CLOSED |
| INLET/OUTLET OPERATING PRESSURE DIFFERENTIAL | 180.0 POUNDS PER SQUARE INCH MAXIMUM |
| CONNECTION TYPE | THREADED INTERNAL BOSS 1ST END |
| CONNECTION STYLE | GASKET SEAL(BOSS) 1ST END |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.375 INCHES 1ST END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| NOMINAL THREAD SIZE | 0.562 INCHES 1ST END |
| THREAD QUANTITY PER INCH | 18 1ST END |
| THREAD CLASS | 3B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| MOUNTING POSITION | HORIZONTAL |
| SPECIAL FEATURES | OPERATING VOLTAGE 18TO 30 VDC; OPERATING INLET PRESSURE 35-200 PSIG; AMBIENT PRESSURE AT SEAL LEVEL TO 20,000 FT. PRESSURE ALTITUDE; TEMPERATURE FLUID RANGE -65 TO 500 DEG FEH; AMBIENT TEMPERATURE IS -65 TO 160 DEG FEH; FLUID TURBINE COMPRESSOR BLEED AIR; RELIEF VALVE CRACKING |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | MANUFACTURERS SUGGESTED NAME IS VALVE CONTROL ENGINE AIR AUX. FUEL SYSTEM |