|
|
|
National Stock Number:
4730-12-170-3379
Federal Supply Class:
4730
National Item Identification Number:
121703379
Description:
BOLT,FLUID PASSAGE
Detail:
A boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
|
Manufacturer Information:
| 4072311025 | D8124 | ZF FRIEDRICHSHAFEN AG |
|
Techincal Specification:
| DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT | 26,5 MILLIMETERS NOMINAL | | DISTANCE FROM SECOND RADIAL HOLE CENTER TO END OF BOLT | 22,5 MILLIMETERS NOMINAL | | CONCENTRIC HOLE DIAMETER | 9,0 MILLIMETERS NOMINAL | | FIRST DIAMETER FROM WRENCHING FEATURE | 14,0 MILLIMETERS NOMINAL | | FIRST END NOMINAL THREAD SIZE | 14,0 MILLIMETERS | | FIRST END THREAD DIRECTION | RIGHT-HAND | | FIRST END THREAD PITCH IN MILLIMETERS | 1,5 | | FIRST END THREAD SERIES DESIGNATOR | ISO M | | FIRST END THREAD TOLERANCE CLASS | 6G EXTERNAL | | FIRST RADIAL FLUID HOLE DIAMETER | 4,5 MILLIMETERS NOMINAL | | HARDNESS RATING | 60,0 ROCKWELL B NOMINAL AND 80,0 ROCKWELL B NOMINAL | | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER | 19,0 MILLIMETERS NOMINAL | | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END | 32,0 MILLIMETERS NOMINAL | | III MATERIAL | STAHL, DIN 17200, 1.0501 C 35 | | MINIMUM TENSILE STRENGTH | 600 NEWTON PRO QUADRATMILLIMETER | | OVERALL LENGTH | 37,0 MILLIMETERS NOMINAL | | SECOND END NOMINAL THREAD SIZE | 10,0 MILLIMETERS | | SECOND END THREAD DIRECTION | RIGHT-HAND | | SECOND END THREAD SERIES DESIGNATOR | ISO M | | SECOND END THREAD PITCH IN MILLIMETERS | 1,0 | | SECOND END THREAD TOLERANCE CLASS | 6H INTERNAL | | SECOND RADIAL FLUID HOLE DIAMETER | 4,5 MILLIMETERS NOMINAL | | WIDTH ACROSS FLATS | 19,0 MILLIMETERS NOMINAL | | WRENCHING FEATURE HEIGHT | 5,0 MILLIMETERS NOMINAL | | WRENCHING FEATURE STYLE | HEXAGON | | TEST DATA DOCUMENT | D8124/ 4072311025 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|