|
|
|
National Stock Number:
4730-01-503-1731
Federal Supply Class:
4730
National Item Identification Number:
015031731
Description:
ELBOW,HOSE
Detail:
A FITTING THAT FORMS AN ANGLE OF LESS THAN 180 DEGREES (3.141 RADIANS) FROM THE STRAIGHT FLOW. IT HAS A FLANGE CONNECTION ON ONE END DESIGNED TO CONNECT WITH ANOTHER FLANGE CONNECTION, OR A COMPRESSION TYPE MOUNTING PAD. THE OTHER END HAS STANDARD HOSE THREADS, AN INCOMPLETE PART OF A THREADED END CONNECTION THAT GRIPS THE HOSE DIRECTLY, OR IS UNTHREADED AND DESIGNED TOACCOMMODATE A HOSE. IT MAY HAVE SIDE AND/OR HEEL INLET(S).
|
Manufacturer Information:
| 218032994 | 96169 | ELECTRIC BOAT CORPORATION | | 264-7015067PNF21-2 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 6640963 REV F | 53711 | NAVAL SEA SYSTEMS COMMAND | | 7015067 REV B | 53711 | NAVAL SEA SYSTEMS COMMAND | | MIL-DTL-24136/3 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | EB3461/3-32,TYBV,1.5INNPS | 96169 | ELECTRIC BOAT CORPORATION | | MIL-DTL-24787/5 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-F-24787/5 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-F-24787/7 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-H-24136/3A | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| CONNECTION TYPE | FLANGE SECOND END | | FLANGE FACE DESIGN | RAISED SWIVEL SECOND END | | FLANGE SHAPE | ROUND SECOND END | | LEG LENGTH | 3.060 INCHES NOMINAL FIRST END | | OPERATING PRESSURE | 150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE | | PART NAME ASSIGNED BY CONTROLLING AGENCY | ELBOW, 90, HOSE X FLG | | MATERIAL | NICKEL ALLOY OVERALL | | MEDIA FOR WHICH DESIGNED | WATER, SALT SINGLE RESPONSE | | NOMINAL OUTSIDE DIAMETER HOSE ACCOMMODATED | 2.220 INCHES SECOND END | | NOMINAL INSIDE DIAMETER HOSE ACCOMMODATED | 1.835 INCHES SECOND END | | SPECIAL FEATURES | PRIOR TO INSTALLATION, ASSY SHALL BE VISUALLY INSPECTED AND HYDROSTATICALLY TESTED TO 700 PSI; USE STRONGBACKS ON THE FLANGE WHEN TESTING WITH HOSE ATTACHED; LOW PRESSURE APPLICATION |
|
|