|
|
|
National Stock Number:
4730-01-408-0146
Federal Supply Class:
4730
National Item Identification Number:
014080146
Description:
ELBOW,TUBE TO BOSS
Detail:
A fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
|
Manufacturer Information:
| 6-8C5OLO-S-LT | 30780 | PARKER-HANNIFIN CORPORATION | | 6-8C5OLO-S-LT | 98441 | PARKER HANNIFIN CORP | | FF1868T0608-214 | 01276 | EATON-AEROQUIP INC DIV FLUID CONNECTORS PRODUCTS | | Z849-TTO-06X08-LT | 13174 | PARKER HANNIFIN CORP HOSE PRODUCTS DIV |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | MAXIMUM OPERATING TEMP | 225.0 DEG FAHRENHEIT SINGLE RESPONSE | | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END | | THREADED EXTERNAL BOSS 2ND END | | CONNECTION STYLE | GASKET SEAL (TUBE) 1ST END | | DOUBLE THREADED SECTION W/ GASKET AND LOCKNUT SEALING (BOSS) 2ND END | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.380 INCHES 1ST END | | THREAD SERIES DESIGNATOR | UNJS 1ST END | | UNF 2ND END | | NOMINAL THREAD SIZE | 0.688 INCHES 1ST END | | 0.750 INCHES 2ND END | | THREAD QUANTITY PER INCH | 16 1ST END | | THREAD CLASS | 2A ALL ENDS | | LEG LENGTH | 1.040 INCHES NOMINAL 1ST END | | 1.600 INCHES NOMINAL 2ND END | | FLOW ANGLE | 90.0 DEGREES | | SPECIAL FEATURES | O-RING BUNA N, LOW TEMP NITRILE RUBBER |
|
|