|
|
|
National Stock Number:
4730-01-339-6746
Federal Supply Class:
4730
National Item Identification Number:
013396746
Description:
ELBOW,TUBE TO BOSS
Detail:
A fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
|
Manufacturer Information:
| AP3067T10 | 01673 | SPS TECHNOLOGIES, LLC | | R45357-90T-10 | 50599 | PARKER-HANNIFIN CORPORATION | | TBD-10 | 00624 | EATON AEROQUIP LLC |
|
Techincal Specification:
| CONNECTION STYLE | CUSHION SEAL (TUBE) 1ST END | | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END | | CONNECTION STYLE | PLAIN (TUBE) 2ND END | | CONNECTION TYPE | UNTHREADED INTERNAL TUBE 2ND END | | FLOW ANGLE | 90.0 DEGREES | | LEG LENGTH | 1.820 INCHES NOMINAL 1ST END | | LEG LENGTH | 1.521 INCHES NOMINAL 2ND END | | MATERIAL | TITANIUM ALLOY OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | MAXIMUM OPERATING TEMP | -65.0 DEG FAHRENHEIT SINGLE RESPONSE | | MAXIMUM OPERATING PRESSURE | 4000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.625 INCHES 1ST END | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.625 INCHES 2ND END | | NOMINAL THREAD SIZE | 0.875 INCHES 1ST END | | NOMINAL THREAD SIZE | 0.875 INCHES 1ST END BULKHEAD | | SPECIAL FEATURES | CRYOFIT TO DYNAMIC BEAM | | THREAD CLASS | 3A 1ST END | | THREAD CLASS | 3A 1ST END BULKHEAD | | THREAD QUANTITY PER INCH | 18 1ST END BULKHEAD | | THREAD QUANTITY PER INCH | 18 1ST END | | THREAD SERIES DESIGNATOR | UNJS 1ST END | | THREAD SERIES DESIGNATOR | UNJS 1ST END BULKHEAD | | TUBING WALL NOMINAL THICKNESS FOR WHICH DESIGNED | 0.046 INCHES 2ND END |
|
|