|
|
|
National Stock Number:
4730-01-124-3754
Federal Supply Class:
4730
National Item Identification Number:
011243754
Description:
BOLT,FLUID PASSAGE
Detail:
A boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
|
Manufacturer Information:
| 10108584 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 7M130 | 76301 | THE BOEING COMPANY | | 7M130-6D | 00624 | EATON AEROQUIP LLC | | 7M130-6D | 01673 | SPS TECHNOLOGIES, LLC | | 7M130-6D | 06581 | ALLAN AIRCRAFT SUPPLY CO., LLC | | 7M130-6D | 13899 | HYDRO-FITTING MANUFACTURING CORPORATION | | 7M130-6D | 14798 | DESIGNED METAL CONNECTIONS INC | | 7M130-6D | 22995 | CROWN FITTING CO INC | | 7M130-6D | 52930 | NELSON AERO SPACE, INC. | | 7M130-6D | 76301 | THE BOEING COMPANY | | 7M130-6D | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT | 0.859 INCHES NOMINAL | | BODY STYLE | PLAIN | | CONCENTRIC HOLE DEPTH | 1.031 INCHES NOMINAL | | CONCENTRIC HOLE DIAMETER | 0.297 INCHES NOMINAL | | FIRST END CONNECTION TYPE | THREADED EXTERNAL TUBE | | FIRST DIAMETER FROM WRENCHING FEATURE | 0.560 INCHES NOMINAL | | FIRST END NOMINAL THREAD SIZE | 0.562 INCHES | | FIRST END STYLE DESIGNATOR | INVERTED FLARE | | FIRST END THREAD DIRECTION | RIGHT-HAND | | FIRST END THREAD CLASS | 3A | | FIRST END THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) | | FIRST END SEAT ANGLE | 45.0 DEGREES NOMINAL | | FIRST RADIAL FLUID HOLE DIAMETER | 0.250 INCHES NOMINAL | | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END | 1.358 INCHES NOMINAL | | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER | 0.968 INCHES NOMINAL | | OVERALL LENGTH | 1.562 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/4 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY | | WIDTH ACROSS FLATS | 0.813 INCHES NOMINAL | | WRENCHING FEATURE HEIGHT | 0.210 INCHES NOMINAL | | WRENCHING FEATURE STYLE | HEXAGON | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | ANODIZE |
|
|