| MATERIAL | ALUMINUM ALLOY OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/6,5083-H321 FED SPEC SINGLE MATERIAL RESPONSE OR |
| QQ-A-250/7,5086-H32 FED SPEC SINGLE MATERIAL RESPONSE OR |
| QQ-A-200/4,5083-H111 FED SPEC SINGLE MATERIAL RESPONSE OR |
| QQ-A-200/5,5083-H111 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | ANODIZE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 3,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CONNECTION TYPE | FLANGE 1ST END |
| THREADED INTERNAL BOSS 2ND END |
| CONNECTION STYLE | GASKET SEAL (BOSS) 2ND END |
| FLANGE SHAPE | RECTANGULAR WITH HOLES 1ST END |
| NOMINAL THICKNESS | 0.315 INCHES 1ST END |
| NOMINAL LENGTH | 2.875 INCHES 1ST END |
| NOMINAL WIDTH | 2.750 INCHES 1ST END |
| BOLT HOLE QUANTITY | 3 1ST END |
| BOLT HOLE NOMINAL DIAMETER | 0.423 INCHES 1ST END |
| CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.875 INCHES 1ST END |
| CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.875 INCHES 1ST END |
| FLANGE FACE DESIGN | PLAIN WITH GASKET GROOVE 1ST END |
| THREAD SERIES DESIGNATOR | UN 2ND END |
| NOMINAL THREAD SIZE | 1.312 INCHES 2ND END |
| THREAD QUANTITY PER INCH | 12 2ND END |
| THREAD CLASS | 2B 2ND END |
| LEG LENGTH | 1.750 INCHES NOMINAL 1ST END |
| 0.875 INCHES NOMINAL 2ND END |
| FLOW ANGLE | 90.0 DEGREES |