|
|
|
National Stock Number:
4730-01-074-4604
Federal Supply Class:
4730
National Item Identification Number:
010744604
Description:
TEE,TUBE TO BOSS
Detail:
A FITTING HAVING THREE CONNECTIONS WITH THE BRANCH CONNECTION FIXED AT 90 DEGREES (1.5705 RADIANS) TO THE RUN. THE TUBE CONNECTION(S) HAS MACHINE THREADS (STRAIGHT THREADS OTHER THAN PIPE OR HOSE SERIES) DESIGNED TO ACCOMMODATE A TUBE, OR IS UNTHREADED AND DESIGNED TO ACCOMMODATE A TUBE. THE BOSS CONNECTION(S) HAS EXTERNAL OR INTERNAL MACHINE THREADS (STRAIGHT THREADS OTHER THAN PIPE OR HOSE SERIES), AND IS DESIGNED TO FACILITATE A GASKET, PREFORMED PACKING, WASHER, OR THE LIKE, TO FORM A SEAL AT THE BOSS. IT MAY HAVE SIDE INLET(S). IT IS USED AS A JUNCTION AT THE INTERSECTION OF A TUBE OR FITTING AND A BOSS OR BOSS FITTING ON ITEMS SUCH AS A TANK, HOUSING, VALVE FITTING, OR THE LIKE. SEE ALSO TEE, TUBE; AND TEE, PIPE TO TUBE. EXCLUDES CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
|
Manufacturer Information:
| 1-02157D5 | 00624 | EATON AEROQUIP LLC | | 16H2511 | 81755 | LOCKHEED MARTIN CORPORATION | | AP7559D060406 | 01673 | SPS TECHNOLOGIES, LLC | | AFP2557D5 | 30974 | AEROFIT, LLC | | C2762 | 81755 | LOCKHEED MARTIN CORPORATION | | C2762D5 | 81755 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| MATERIAL | ALUMINUM ALLOY 2014 OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END | | THREADED INTERNAL BOSS 2ND END | | THREADED EXTERNAL TUBE 3RD END | | THREADED EXTERNAL TUBE 2ND END BULKHEAD | | CONNECTION STYLE | FLARED (TUBE) 1ST END | | GASKET SEAL (BOSS) 2ND END | | FLARED (TUBE) 3RD END | | SEAT ANGLE | 37.0 DEGREES 1ST END | | 37.0 DEGREES 3RD END | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.375 INCHES 1ST END | | 0.375 INCHES 3RD END | | THREAD SERIES DESIGNATOR | UNF ALL ENDS | | UNF 2ND END BULKHEAD | | NOMINAL THREAD SIZE | 0.562 INCHES 1ST END | | 0.438 INCHES 2ND END | | 0.562 INCHES 3RD END | | 0.438 INCHES 2ND END BULKHEAD | | THREAD CLASS | 3A 1ST END | | 3B 2ND END | | 3A 3RD END | | 3B 2ND END BULKHEAD | | LEG LENGTH | 2.000 INCHES NOMINAL 1ST END | | 0.750 INCHES NOMINAL 2ND END | | 1.250 INCHES NOMINAL 3RD END | | REDUCED PASSAGE NOMINAL INSIDE DIAMETER | 0.297 INCHES 2ND END |
|
|