4730-00-990-8150, BOLT,FLUID PASSAGE

5950-00-990-8146 TRANSFORMER,RADIO FREQUENCY

National Stock Number:
4730-00-990-8150

Federal Supply Class:
4730

National Item Identification Number:
009908150

Description:
BOLT,FLUID PASSAGE

Detail:
A boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.

Manufacturer Information:

MS21952-10H4

96906

MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

DISTANCE FROM SECOND RADIAL HOLE CENTER TO END OF BOLT	1.917 INCHES NOMINAL
BODY STYLE	BODY WRENCHING
CONCENTRIC HOLE DIAMETER	0.422 INCHES NOMINAL
DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT	3.103 INCHES NOMINAL
FIFTH DIAMETER FROM WRENCHING FEATURE	0.811 INCHES NOMINAL
FIRST DIAMETER FROM WRENCHING FEATURE	0.811 INCHES NOMINAL
FIRST END CONNECTION TYPE	THREADED EXTERNAL TUBE
FIRST END SEAT ANGLE	37.0 DEGREES NOMINAL
FIRST END STYLE DESIGNATOR	FLARED
FIRST END NOMINAL THREAD SIZE	0.437 INCHES
FIRST END THREAD CLASS	3A
FIRST END THREAD DIRECTION	RIGHT-HAND
FIRST END THREAD LENGTH	1.156 INCHES NOMINAL
FIRST END THREAD QUANTITY PER INCH	20
FIRST END THREAD SERIES DESIGNATOR	UNF
FIRST RADIAL FLUID HOLE DIAMETER	0.300 INCHES NOMINAL
FOURTH DIAMETER FROM WRENCHING FEATURE	0.740 INCHES NOMINAL
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END	3.737 INCHES NOMINAL
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIFTH DIAMETER	2.404 INCHES NOMINAL
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER	0.377 INCHES NOMINAL
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FOURTH DIAMETER	2.012 INCHES NOMINAL
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF SECOND DIAMETER	0.891 INCHES NOMINAL
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF SIXTH DIAMETER	2.581 INCHES NOMINAL
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF THIRD DIAMETER	1.563 INCHES NOMINAL
OVERALL LENGTH	4.932 INCHES NOMINAL
MATERIAL	ALUMINUM
SECOND DIAMETER FROM WRENCHING FEATURE	0.740 INCHES NOMINAL
SECOND END CONNECTION TYPE	THREADED EXTERNAL TUBE
SECOND END STYLE DESIGNATOR	FLARED
SECOND END THREAD DIRECTION	RIGHT-HAND
SECOND END THREAD CLASS	3A
SECOND END THREAD LENGTH	0.758 INCHES NOMINAL
SECOND END THREAD SERIES DESIGNATOR	UNF
SECOND END THREAD QUANTITY PER INCH	14
SECOND END NOMINAL THREAD SIZE	0.875 INCHES
SECOND END SEAT ANGLE	37.0 DEGREES NOMINAL
SECOND RADIAL FLUID HOLE DIAMETER	0.300 INCHES NOMINAL
SIXTH DIAMETER FROM WRENCHING FEATURE	0.363 INCHES NOMINAL
SURFACE TREATMENT	ANODIZE
THIRD DIAMETER FROM WRENCHING FEATURE	0.811 INCHES NOMINAL
WIDTH ACROSS FLATS	1.121 INCHES MINIMUM AND 1.128 INCHES MAXIMUM
WRENCHING FEATURE HEIGHT	0.437 INCHES NOMINAL
WRENCHING FEATURE STYLE	HEXAGON

Click here to Register for Free 30-day Trial