4730-00-888-4754, BOLT,FLUID PASSAGE

7510-00-888-4756 TAPE,PRESSURE SENSITIVE ADHESIVE

National Stock Number:
4730-00-888-4754

Federal Supply Class:
4730

National Item Identification Number:
008884754

Description:
BOLT,FLUID PASSAGE

Detail:
A boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.

Manufacturer Information:

1-110-114-08	13889	NORMAN NOBLE INC
1-110-114-08	78U39	OZARK AEROWORKS LLC
4730V0761	16236	DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS)
1-110-114-08	99193	HONEYWELL INTERNATIONAL INC.
1-110-114-08	9A148	NORCATEC LLC

Techincal Specification:

CONCENTRIC HOLE DIAMETER	0.075 INCHES MINIMUM AND 0.076 INCHES MAXIMUM
FIRST END NOMINAL THREAD SIZE	0.312 INCHES
FIRST END THREAD CLASS	3A
FIRST END THREAD LENGTH	0.175 INCHES NOMINAL
FIRST END THREAD DIRECTION	RIGHT-HAND
FIRST END THREAD QUANTITY PER INCH	24
FIRST END THREAD SERIES DESIGNATOR	UNF
FOURTH DIAMETER FROM WRENCHING FEATURE	0.247 INCHES MINIMUM AND 0.248 INCHES MAXIMUM
HARDNESS RATING	18.0 ROCKWELL C MINIMUM AND 26.0 ROCKWELL C MAXIMUM
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER	0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FOURTH DIAMETER	0.810 INCHES NOMINAL
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF SECOND DIAMETER	0.710 INCHES NOMINAL
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF THIRD DIAMETER	0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	AMS5613 ASSN STD SINGLE MATERIAL RESPONSE
OVERALL LENGTH	0.990 INCHES NOMINAL
MATERIAL	STEEL CORROSION RESISTING
SECOND DIAMETER FROM WRENCHING FEATURE	0.168 INCHES MINIMUM AND 0.170 INCHES MAXIMUM
WIDTH ACROSS FLATS	0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM
WRENCHING FEATURE STYLE	HEXAGON

Click here to Register for Free 30-day Trial