|
|
|
National Stock Number:
4730-00-886-8481
Federal Supply Class:
4730
National Item Identification Number:
008868481
Description:
ELBOW,TUBE TO BOSS
Detail:
A fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
|
Manufacturer Information:
| 32-69862-3 | 76301 | THE BOEING COMPANY | | CS4730-SR-0700 | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) |
|
Techincal Specification:
| MATERIAL | ALUMINUM ALLOY 2014 OVERALL | | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE | | MAXIMUM OPERATING PRESSURE | 4500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END | | THREADED INTERNAL BOSS 2ND END | | THREADED EXTERNAL TUBE 1ST END BULKHEAD | | CONNECTION STYLE | FLARELESS (TUBE) 1ST END | | GASKET SEAL (BOSS) 2ND END | | SEAT ANGLE | 12.0 DEGREES 1ST END | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 1.000 INCHES 1ST END | | THREAD SERIES DESIGNATOR | UNJ 1ST END | | UN 2ND END | | UNJ 1ST END BULKHEAD | | NOMINAL THREAD SIZE | 1.312 INCHES ALL ENDS | | 1.312 INCHES 1ST END BULKHEAD | | THREAD QUANTITY PER INCH | 12 ALL ENDS | | 12 1ST END BULKHEAD | | THREAD CLASS | 3A 1ST END | | 3B 2ND END | | 3A 1ST END BULKHEAD | | LEG LENGTH | 3.370 INCHES NOMINAL 1ST END | | 2.170 INCHES NOMINAL 2ND END | | FLOW ANGLE | 60.0 DEGREES |
|
|