|
|
|
National Stock Number:
4730-00-417-2235
Federal Supply Class:
4730
National Item Identification Number:
004172235
Description:
ELBOW,TUBE TO BOSS
Detail:
A fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
|
Manufacturer Information:
| 738627-1 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| MATERIAL | ALUMINUM ALLOY OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4121 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE INSIDE | | ANODIZE OUTSIDE | | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END | | THREADED EXTERNAL BOSS 2ND END | | CONNECTION STYLE | FLARED (TUBE) 1ST END | | DOUBLE THREADED SECTION W/ GASKET AND LOCKNUT SEALING (BOSS) 2ND END | | SEAT ANGLE | 37.0 DEGREES 1ST END | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.375 INCHES 1ST END | | THREAD SERIES DESIGNATOR | UNF 1ST END | | UNF 2ND END | | NOMINAL THREAD SIZE | 0.562 INCHES 1ST END | | 0.562 INCHES 2ND END | | THREAD CLASS | 3A 1ST END | | 2A 2ND END | | LEG LENGTH | 1.050 INCHES MINIMUM AND | | 1.110 INCHES MAXIMUM 1ST END | | 1.470 INCHES MINIMUM AND | | 1.530 INCHES MAXIMUM 2ND END | | FLOW ANGLE | 90.0 DEGREES | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 73030 | | DESIGN CONTROL REFERENCE | 738627-1 |
|
|