|
|
|
National Stock Number:
4730-00-385-8795
Federal Supply Class:
4730
National Item Identification Number:
003858795
Description:
ELBOW,TUBE TO BOSS
Detail:
A fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
|
Manufacturer Information:
| 10 V50X-S | 30780 | PARKER-HANNIFIN CORPORATION | | 10 V50X-S | 98441 | PARKER HANNIFIN CORP | | 218-5137 | 10988 | CNH INDUSTRIAL AMERICA LLC | | 10-10 070320C | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | 9183509 | 97907 | TEREX CORP | | 218-5137 | K5579 | CNH UK LIMITED | | J514 | 0U583 | SAE INTERNATIONAL | | SAE J514 10-10 070320CA | 0U583 | SAE INTERNATIONAL | | SAE J514/1 10-10 070320CA | 0U583 | SAE INTERNATIONAL | | SAE-J514 | 0U583 | SAE INTERNATIONAL | | SAE-J514/1 | 0U583 | SAE INTERNATIONAL | | SAE J514 10-10 070320CA | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | J514 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC |
|
Techincal Specification:
| MATERIAL | STEEL ELBOW | | STEEL NUT | | RUBBER SYNTHETIC GASKET | | MEDIA FOR WHICH DESIGNED | FLUID SINGLE RESPONSE | | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END | | THREADED EXTERNAL BOSS 2ND END | | CONNECTION STYLE | FLARED (TUBE) 1ST END | | EXTERNAL SEAT FOR GASKET SEAL (BOSS) 2ND END | | SEAT ANGLE | 37.0 DEGREES 1ST END | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.625 INCHES 1ST END | | THREAD SERIES DESIGNATOR | UNF ALL ENDS | | NOMINAL THREAD SIZE | 0.875 INCHES ALL ENDS | | THREAD CLASS | 2A ALL ENDS | | LEG LENGTH | 1.110 INCHES MINIMUM AND | | 1.180 INCHES MAXIMUM 1ST END | | 1.520 INCHES NOMINAL 2ND END | | FLOW ANGLE | 45.0 DEGREES | | FURNISHED ITEMS AND QUANTITY | 1 LOCKNUT AND | | 1 PREFORMED PACKING AND | | 1 FLAT WASHER | | SPECIFICATION/STANDARD DATA | 81343-J514 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD | | NONDEFINITIVE SPEC/STD DATA | 10B FIGURE |
|
|