4730-00-306-6636, BOLT,FLUID PASSAGE

National Stock Number:
4730-00-306-6636

Federal Supply Class:
4730

National Item Identification Number:
003066636

Description:
BOLT,FLUID PASSAGE

Detail:
A boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.

Manufacturer Information:

2662465

92003

PARKER HANNIFIN CORPORATION DIV AEROSPACE GROUP HEADQUARTERS

Techincal Specification:

DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT	0.716 INCHES NOMINAL
BODY STYLE	BODY WRENCHING
CONCENTRIC HOLE DIAMETER	0.172 INCHES NOMINAL
FIRST END CONNECTION TYPE	THREADED EXTERNAL TUBE
FIRST DIAMETER FROM WRENCHING FEATURE	0.350 INCHES NOMINAL
FIRST END NOMINAL THREAD SIZE	0.437 INCHES
FIRST END THREAD CLASS	3A
FIRST END THREAD DIRECTION	RIGHT-HAND
FIRST END THREAD LENGTH	0.282 INCHES NOMINAL
FIRST END THREAD SERIES DESIGNATOR	UNF
FIRST END THREAD QUANTITY PER INCH	20
FIRST RADIAL FLUID HOLE DIAMETER	0.178 INCHES NOMINAL
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END	1.069 INCHES NOMINAL
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER	0.075 INCHES MINIMUM AND 0.090 INCHES MAXIMUM
OVERALL LENGTH	1.949 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 2024
SECOND END CONNECTION TYPE	THREADED EXTERNAL TUBE
SECOND END NOMINAL THREAD SIZE	0.437 INCHES
SECOND END THREAD CLASS	3A
SECOND END THREAD DIRECTION	RIGHT-HAND
SECOND END THREAD LENGTH	0.457 INCHES NOMINAL
SECOND END THREAD QUANTITY PER INCH	20
SECOND END THREAD SERIES DESIGNATOR	UNF
SECOND END SEAT ANGLE	37.0 DEGREES NOMINAL
SECOND END STYLE DESIGNATOR	FLARED
WIDTH ACROSS FLATS	0.688 INCHES NOMINAL
WRENCHING FEATURE HEIGHT	0.180 INCHES NOMINAL
WRENCHING FEATURE STYLE	HEXAGON
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENT	ANODIZE

Click here to Register for Free 30-day Trial