4730-00-288-0572, BOLT,FLUID PASSAGE

National Stock Number:
4730-00-288-0572

Federal Supply Class:
4730

National Item Identification Number:
002880572

Description:
BOLT,FLUID PASSAGE

Detail:
A boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.

Manufacturer Information:

1284725-101	98897	LOCKHEED MARTIN CORP
1284725-105	6Z800	A AND M AEROSPACE, INC.
1284725-105	98897	LOCKHEED MARTIN CORP

Techincal Specification:

DISTANCE FROM BOLT END TO HOLE CENTER	0.256 INCHES MINIMUM AND 0.286 INCHES MAXIMUM
DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT	4.140 INCHES MINIMUM AND 4.185 INCHES MAXIMUM
BODY STYLE	SHOULDER
CONCENTRIC HOLE DEPTH	6.100 INCHES NOMINAL
CONCENTRIC HOLE DIAMETER	0.155 INCHES MINIMUM AND 0.161 INCHES MAXIMUM
COTTER PIN HOLE DIAMETER	0.155 INCHES MINIMUM AND 0.162 INCHES MAXIMUM
FIRST DIAMETER FROM WRENCHING FEATURE	0.748 INCHES MINIMUM AND 0.749 INCHES MAXIMUM
FIRST END NOMINAL THREAD SIZE	1.000 INCHES
FIRST END THREAD CLASS	3A
FIRST END THREAD DIRECTION	RIGHT-HAND
FIRST END THREAD LENGTH	0.640 INCHES MINIMUM AND 0.670 INCHES MAXIMUM
FIRST END THREAD SERIES DESIGNATOR	UNF
FIRST END THREAD QUANTITY PER INCH	12
FIRST RADIAL FLUID HOLE DIAMETER	0.124 INCHES MINIMUM AND 0.129 INCHES MAXIMUM
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END	4.510 INCHES MINIMUM AND 4.545 INCHES MAXIMUM
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER	3.850 INCHES MINIMUM AND 3.865 INCHES MAXIMUM
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF SECOND DIAMETER	4.035 INCHES MINIMUM AND 4.050 INCHES MAXIMUM
OVERALL LENGTH	4.800 INCHES MINIMUM AND 4.845 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	C-05-1190 FSCM 36659 MFR REF SINGLE MATERIAL RESPONSE
MATERIAL	STEEL
MINIMUM TENSILE STRENGTH	270000 POUNDS PER SQUARE INCH
SECOND DIAMETER FROM WRENCHING FEATURE	0.534 INCHES MINIMUM AND 0.544 INCHES MAXIMUM
SECOND END NOMINAL THREAD SIZE	0.250 INCHES
SECOND END THREAD CLASS	3B
SECOND END THREAD LENGTH	0.180 INCHES NOMINAL
SECOND END THREAD DIRECTION	RIGHT-HAND
SECOND END THREAD QUANTITY PER INCH	28
SECOND END THREAD SERIES DESIGNATOR	UNF
WRENCHING FEATURE HEIGHT	0.250 INCHES NOMINAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	LC+77-1036 FSCM 36659 MFR REF 1ST TREATMENT RESPONSE AND LC+772035 FSCM 36659 MFR REF 2ND TREATMENT RESPONSE
SURFACE TREATMENT	CADMIUM AND CHROMIUM
TEST DATA DOCUMENT	36659-LC+72-1076 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

Click here to Register for Free 30-day Trial