| BODY STYLE | RELIEVED |
| CONCENTRIC HOLE DEPTH | 2.000 INCHES MINIMUM AND 2.250 INCHES MAXIMUM |
| CONCENTRIC HOLE DIAMETER | 0.250 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT | 1.722 INCHES NOMINAL |
| FIRST DIAMETER FROM WRENCHING FEATURE | 0.742 INCHES MINIMUM AND 0.745 INCHES MAXIMUM |
| FIRST END CONNECTION TYPE | THREADED EXTERNAL TUBE |
| FIRST END STYLE DESIGNATOR | PLAIN |
| FIRST END NOMINAL THREAD SIZE | 0.625 INCHES |
| FIRST END THREAD DIRECTION | RIGHT-HAND |
| FIRST END THREAD CLASS | 3A |
| FIRST END THREAD LENGTH | 0.580 INCHES NOMINAL |
| FIRST END THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| FIRST END THREAD QUANTITY PER INCH | 18 |
| FIRST RADIAL FLUID HOLE DIAMETER | 0.060 INCHES NOMINAL |
| FOURTH DIAMETER FROM WRENCHING FEATURE | 0.534 INCHES MINIMUM AND 0.544 INCHES MAXIMUM |
| LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END | 2.722 INCHES NOMINAL |
| LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER | 0.075 INCHES NOMINAL |
| LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FOURTH DIAMETER | 2.142 INCHES NOMINAL |
| LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF SECOND DIAMETER | 1.000 INCHES NOMINAL |
| LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF THIRD DIAMETER | 1.982 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626,COND C4 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH |
| OVERALL LENGTH | 3.097 INCHES MINIMUM AND 3.112 INCHES MAXIMUM |
| SECOND DIAMETER FROM WRENCHING FEATURE | 0.730 INCHES MINIMUM AND 0.740 INCHES MAXIMUM |
| SPECIAL FEATURES | FITTING,LUBRICTION PART NO. MS15001-1 IN THD END |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | LC+77-1061 MFR REF SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CADMIUM |
| TEST DATA DOCUMENT | 36659-LC+72-1076 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THIRD DIAMETER FROM WRENCHING FEATURE | 0.749 INCHES NOMINAL |
| WIDTH ACROSS FLATS | 1.052 INCHES MINIMUM AND 1.064 INCHES MAXIMUM |
| WRENCHING FEATURE HEIGHT | 0.350 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| WRENCHING FEATURE STYLE | HEXAGON |