|
|
|
National Stock Number:
4730-00-277-9731
Federal Supply Class:
4730
National Item Identification Number:
002779731
Description:
SLEEVE,CLINCH,TUBE FITTING
Detail:
A FLANGED CYLINDRICAL ITEM HAVING A SHARP CUTTING SURFACE ON THE INSIDE DIAMETER AT THE END OPPOSITE THE FLANGE. THE CUTTING EDGE, IN USE, IS DESIGNED TO IMBED IN THE TUBING DUE TO PRESSURE EXERTED WHEN THE OUTSIDE DIAMETER OF THE SLEEVE IS FORCED INTO AND AGAINST AN ANGULAR SEAT. THIS FIRMLY ATTACHES THE SLEEVE TO THE TUBING AND THE FLANGED END THEN SERVES AS A BEARING SURFACE FOR THE COUPLING NUT TO BRING THE TUBING INTO THE MATING FITTING.
|
Manufacturer Information:
| 108-16510 | 01276 | EATON-AEROQUIP INC DIV FLUID CONNECTORS PRODUCTS | | 108-16510 | 79470 | DANA CORP WEATHERHEAD DIV | | 3H1834 | 11083 | CATERPILLAR INC | | 11640 | 13841 | TIFFIN PARTS, L.L.C. | | 2300094-031400.42.0 | C2311 | BUNDESAMT FUER AUSRUESTUNG, INFORMATIONSTECHNIK UND NUTZUNG DER BUNDESWEHR (BAAINBW) - BENUTZUNGSRECHTE AN TECHNISCHEN U | | 2300094-031400.42.0 | D2692 | KRAUSS-MAFFEI WEGMANN GMBH & CO. KG-WERK KASSEL- | | P8165X10 | 01276 | EATON-AEROQUIP INC DIV FLUID CONNECTORS PRODUCTS | | 624X10 | 32537 | JOY GLOBAL UNDERGROUND MINING LLC | | 8165X10 | 79470 | DANA CORP WEATHERHEAD DIV | | 45-4328-002-060 | 81336 | CHIEF OF ENGINEERS DEPT OF ARMY | | MS39212 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS39212-7 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | 4730-277-9731 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 4730002779731 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | P8165X10 | 79470 | DANA CORP WEATHERHEAD DIV |
|
Techincal Specification:
| CASEHARDENING INDICATOR | NOT CASEHARDENED | | FLANGE OUTSIDE DIAMETER | 0.750 INCHES MINIMUM AND 0.760 INCHES MAXIMUM | | FLANGE WIDTH | 0.116 INCHES MINIMUM AND 0.122 INCHES MAXIMUM | | HOSE/TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED | 0.625 INCHES NOMINAL | | OVERALL LENGTH | 0.412 INCHES MINIMUM AND 0.418 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66, COMP 1118 FED STD 3RD MATERIAL RESPONSE OR FED STD 66, COMP 1137 FED STD 4TH MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1213 OR STEEL COMP 1117 OR STEEL COMP 1118 OR STEEL COMP 1137 | | SEAT ANGLE IN DEG | 40.0 | | SLEEVE OUTSIDE DIAMETER | 0.711 INCHES MINIMUM AND 0.715 INCHES MAXIMUM | | STYLE DESIGNATOR | FLARELESS | | SURFACE TREATMENT | CADMIUM OR CHROMATE |
|
|