|
|
|
National Stock Number:
4730-00-277-9725
Federal Supply Class:
4730
National Item Identification Number:
002779725
Description:
SLEEVE,CLINCH,TUBE FITTING
Detail:
A FLANGED CYLINDRICAL ITEM HAVING A SHARP CUTTING SURFACE ON THE INSIDE DIAMETER AT THE END OPPOSITE THE FLANGE. THE CUTTING EDGE, IN USE, IS DESIGNED TO IMBED IN THE TUBING DUE TO PRESSURE EXERTED WHEN THE OUTSIDE DIAMETER OF THE SLEEVE IS FORCED INTO AND AGAINST AN ANGULAR SEAT. THIS FIRMLY ATTACHES THE SLEEVE TO THE TUBING AND THE FLANGED END THEN SERVES AS A BEARING SURFACE FOR THE COUPLING NUT TO BRING THE TUBING INTO THE MATING FITTING.
|
Manufacturer Information:
| 108-16502 | 79470 | DANA CORP WEATHERHEAD DIV | | 8165X02 | 79470 | DANA CORP WEATHERHEAD DIV | | 8165X2 | 79470 | DANA CORP WEATHERHEAD DIV | | MS39212-1 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| CASEHARDENING INDICATOR | NOT CASEHARDENED | | FLANGE OUTSIDE DIAMETER | 0.203 INCHES MINIMUM AND 0.213 INCHES MAXIMUM | | FLANGE WIDTH | 0.078 INCHES MINIMUM AND 0.084 INCHES MAXIMUM | | HOSE/TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED | 0.125 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66, COMP 1113 FED STD 1ST MATERIAL RESPONSE OR FED STD 66, COMP 1117 FED STD 2ND MATERIAL RESPONSE OR FED STD 66, COMP 1118 FED STD 3RD MATERIAL RESPONSE OR FED STD 66, COMP 1137 FED STD 4TH MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1213 OR STEEL COMP 1117 OR STEEL COMP 1118 OR STEEL COMP 1137 | | OVERALL LENGTH | 0.275 INCHES MINIMUM AND 0.281 INCHES MAXIMUM | | SEAT ANGLE IN DEG | 40.0 | | SLEEVE OUTSIDE DIAMETER | 0.175 INCHES MINIMUM AND 0.178 INCHES MAXIMUM | | STYLE DESIGNATOR | FLARELESS | | SURFACE TREATMENT | CADMIUM OR CHROMATE |
|
|