| MATERIAL | ALUMINUM ALLOY 2014 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4135 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | ANODIZE INSIDE |
| CONNECTION TYPE | FLANGE 1ST END |
| THREADED INTERNAL BOSS 2ND END |
| THREADED INTERNAL TUBE INLET |
| CONNECTION STYLE | GASKET SEAL (BOSS) 2ND END |
| DOUBLE COMPRESSION (TUBE) INLET |
| SEAT NOMINAL RADIUS | 0.015 INCHES INLET |
| FLANGE SHAPE | RECTANGULAR WITH HOLES 1ST END |
| NOMINAL THICKNESS | 0.250 INCHES 1ST END |
| NOMINAL LENGTH | 2.296 INCHES 1ST END |
| NOMINAL WIDTH | 2.296 INCHES 1ST END |
| BOLT HOLE QUANTITY | 4 1ST END |
| BOLT HOLE NOMINAL DIAMETER | 0.344 INCHES 1ST END |
| CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.656 INCHES 1ST END |
| CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.656 INCHES 1ST END |
| FLANGE FACE DESIGN | RAISED STRAIGHT 1ST END |
| RAISED FACE NOMINAL HEIGHT | 0.170 INCHES 1ST END |
| RAISED FACE NOMINAL DIAMETER | 1.225 INCHES 1ST END |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.250 INCHES INLET |
| THREAD SERIES DESIGNATOR | UNF 2ND END |
| UNF INLET |
| NOMINAL THREAD SIZE | 0.750 INCHES 2ND END |
| 0.437 INCHES INLET |
| THREAD CLASS | 2B 2ND END |
| 3B INLET |
| LEG LENGTH | 0.780 INCHES NOMINAL 1ST END |
| 1.880 INCHES NOMINAL 2ND END |
| 0.970 INCHES NOMINAL INLET |
| REDUCED PASSAGE NOMINAL INSIDE DIAMETER | 0.430 INCHES 2ND END |
| FLOW ANGLE | 90.0 DEGREES |
| SPECIAL FEATURES | PAINTED ON OUTSIDE |