| END CONNECTION DESIGN | ELBOW 1ST END |
| END CONNECTION DESIGN | STRAIGHT 2ND END |
| BURST TEST PRESSURE | 11000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL HOSE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL HOSE 1ST END |
| CONNECTION STYLE | SWIVEL NUT, FLARED 1ST END |
| CONNECTION STYLE | SWIVEL NUT, FLARED 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| INSIDE DIAMETER | 6.35 MILLIMETERS MINIMUM |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER CORRUGATED CORROSION RESISTANT STEEL |
| HYDROSTATIC TEST PRESSURE | 5500.0 POUNDS PER SQUARE INCH |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | HOSE ASSEMBLY |
| MAXIMUM OPERATING PRESSURE | 2750.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 661.0 MILLIMETERS NOMINAL OVERALL |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID, MIL-H-5606 1ST RESPONSE |
| MEDIA FOR WHICH DESIGNED | FUEL, DIESEL 2ND RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 125.0 MILLIMETERS |
| OUTSIDE DIAMETER | 14.0 MILLIMETERS MAXIMUM |
| SEAT ANGLE | 90.0 DEGREES 1ST END |
| SPECIAL FEATURES | HOSE AND APPLICABLE FITTINGS SHALL COMPLY WITH THE REQUIREMENTS OF PARKER PARFLEX FLEXIABLE METAL HOSE. CORRIGATED STAINLESS STEEL HOSE WITH BRAIDED OUTER COVER. |
| SPECIAL TEST FEATURES | WHEN MATED WITH APPROPRIATE SIZED END PER SAE A54395OF THE SAME MATERIAL, THE HOSE ASSEMBLY SHALL SHOW NO EVIDENCE OF LEAKAGE OR PERMINATE DEFORMATIONDURING HYDROSTATIC PROOF PRESSURE TESTING TO 5500 PSIGMINIMUM FOR A PERIOD OF NO LESS THAN 30 SECONDS. EACH HOSE ASSEMBLY MUST BE TESTED WITH 150PSI NITROGEN UNDER WATER FOR A PERIOD OF NOT LESS THAN 30 SECONDS WITH NO INDICATION OF OF FAILURE OR LEAKAGE. THE TEST SPECIMEN MUST BE MAINTAINED IN A FLAT POSITION DURING TESTING. |
| TEMP RATING | -40.0 DEG CELSIUS AND 121.0 DEG CELSIUS 1ST RESPONSE |
| THREAD SERIES DESIGNATOR | JIC ALL ENDS |