| CONNECTION TYPE | THREADED INTERNAL TUBE ALL ENDS |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 128.0 INCHES NOMINAL WORKING |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -55.0 DEG FAHRENHEIT AND |
| 300.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 750.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| OUTER COVERING ENVIRONMENTAL PROTECTION | FUEL RESISTANT AND |
| OIL RESISTANT AND |
| OZONE RESISTANT AND |
| MILDEW RESISTANT AND |
| VIBRATION RESISTANT |
| LAYER COMPOSITION AND LOCATION | INNER RUBBER, SYNTHETIC AND |
| 1ST LAYER BRAIDED FABRIC AND |
| 2ND LAYER BRAIDED WIRE AND |
| OUTER LAYER RUBBER IMPREGNATED FABRIC |
| MINIMUM INSIDE BENDING RADIUS | 2.75 INCHES |
| INSIDE DIAMETER | 0.625 INCHES NOMINAL |
| OUTSIDE DIAMETER | 0.953 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING ZINC ALL ENDS |
| CONNECTION STYLE | SWIVEL NUT FLARE ALL ENDS |
| SEAT ANGLE | 37.0 DEGREES ALL ENDS |
| END CONNECTION DESIGN | STRAIGHT ALL ENDS |
| THREAD SERIES DESIGNATOR | UN ALL ENDS |
| NOMINAL THREAD SIZE | 1.062 INCHES ALL ENDS |
| THREAD QUANTITY PER INCH | 12 1ST END |
| THREAD CLASS | 2B ALL ENDS |
| THREAD DIRECTION | RIGHT-HAND ALL ENDS |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 81349 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-DTL-13444 |
| MANUFACTURERS CODE | 96906 |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MS52103Z-121280P |