| CONNECTION TYPE | THREADED INTERNAL TUBE ALL ENDS |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 13.0 INCHES NOMINAL WORKING |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -45.0 DEG FAHRENHEIT AND |
| 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER RUBBER COMPOSITION AND |
| 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE AND |
| OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| OUTSIDE DIAMETER | 0.75 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| INNER CONVEYING TUBE STYLE | PLAIN |
| CONNECTION STYLE | SWIVEL NUT WITH LOOSE OR INTEGRAL CLINCH SLEEVE ALL ENDS |
| END CONNECTION DESIGN | ELBOW ALL ENDS |
| FLOW ANGLE | 45.0 DEGREES 1ST END |
| 90.0 DEGREES 2ND END |
| THREAD SERIES DESIGNATOR | UNF ALL ENDS |
| NOMINAL THREAD SIZE | 0.75 INCHES ALL ENDS |
| THREAD QUANTITY PER INCH | 16 ALL ENDS |
| THREAD CLASS | 3B ALL ENDS |
| THREAD TOLERANCE CLASS | 3B INTERNAL ALL ENDS |
| THREAD DIRECTION | RIGHT-HAND ALL ENDS |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.75 INCHES ALL ENDS |
| FEATURES PROVIDED | REUSABLE END FITTINGS |
| SPECIAL FEATURES | PART NUMBER INCOMPLETE-IT DOES NOT SPECIFY MATERIAL OF FITTINGS OR ANGLE BETWEEN ELBOWS(IN 5 DEG INCREMENTS) |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | HOSE ASSEMBLY, NONMETALLIC |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 81349 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-DTL-83796/1 |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | M83796/1K130J14 |