| END CONNECTION DESIGN | ELBOW 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END FITTING COMPONENT AND MATERIAL | SOCKET STEEL ALL ENDS |
| BURST TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL HOSE ALL ENDS |
| CONNECTION STYLE | SWIVEL NUT FLARE ALL ENDS |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLOW ANGLE | 90.0 DEGREES 2ND END |
| INSIDE DIAMETER | 0.312 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER MOLDED RUBBER, SYNTHETIC AND 2ND LAYER BRAIDED FIBER AND OUTER LAYER BRAIDED POLYAMIDE CORD |
| INNER CONVEYING TUBE STYLE | PLAIN |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | HOSE ASSEMBLY NUMBER 6 CR 37.0 2266 |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM OPERATING PRESSURE | 500.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 37.000 INCHES NOMINAL OVERALL |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID 1ST RESPONSE |
| MEDIA FOR WHICH DESIGNED | OIL, LUBRICATING, DIESTER BASE 2ND RESPONSE |
| MEDIA FOR WHICH DESIGNED | ETHYLENE GLYCOL 4TH RESPONSE |
| MEDIA FOR WHICH DESIGNED | FUEL, DIESEL 3RD RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 1.000 INCHES |
| NOMINAL INSIDE DIAMETER HOSE ACCOMMODATED | 0.312 INCHES ALL ENDS |
| NOMINAL THREAD SIZE | 0.563 INCHES ALL ENDS |
| OUTSIDE DIAMETER | 0.620 INCHES NOMINAL |
| SEAT ANGLE | 37.0 DEGREES ALL ENDS |
| TEMP RATING | -58.0 DEG FAHRENHEIT AND 302.0 DEG FAHRENHEIT SINGLE RESPONSE |
| THREAD DIRECTION | RIGHT-HAND ALL ENDS |
| THREAD SERIES DESIGNATOR | UNF ALL ENDS |