| CONNECTION TYPE | THREADED INTERNAL HOSE 1ST END |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 36.000 INCHES NOMINAL WORKING |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -65.0 DEG FAHRENHEIT AND |
| 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 2500.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 9000.0 POUNDS PER SQUARE INCH |
| MINIMUM INSIDE BENDING RADIUS | 5.000 INCHES |
| INSIDE DIAMETER | 0.375 INCHES NOMINAL |
| OUTSIDE DIAMETER | 0.781 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| NOMINAL THREAD SIZE | 0.562 INCHES 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| FEATURES PROVIDED | REUSABLE END FITTINGS |
| SPECIAL MARKINGS | HOSE IS TO BE EMBOSSED OR MARKED IN WHITE PERM INK ON THE LAY LINE WITH PIN, DT OF MFR (QTR AND QTR YR), CAPITAL LTRS "OZ" AND BULK HOSE MFR CAGE |
| SPECIFICATION/STANDARD DATA | 81349 - MIL-DTL-13531G 17 MAY 2006 AND MS50077E 17 MAY 2005 GOVERNMENT SPECIFICATION |
| SPECIAL FEATURES | HOSE IS TYPE 1, CLASS A, WITH HEAVY COVER; WIRE BRAID LAYER IS STEEL WIRE AND THE OD IS 0.594 INCHES DIA NOMINAL;HOSE IS OIL, OZONE, AND FUNGUS RESISTANT |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | HOSE ASSEMBLY, RUBBER, HYDRAULIC AND PNEUMATIC, MEDIUM PRESSURE, FEMALE 37 DEGREE FLARED TUBE |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 81349 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-DTL-13531 |
| MANUFACTURERS CODE | 96906 |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MS500077A60360 |