| END FITTING COMPONENT AND MATERIAL | NIPPLE TITANIUM AND NUT TITANIUM AND SOCKET STEEL CORROSION RESISTING ALL ENDS |
| BURST TEST PRESSURE | 20000.0 POUNDS PER SQUARE INCH |
| CRITICALITY CODE JUSTIFICATION | AGAV |
| HYDROSTATIC TEST PRESSURE | 10000.0 POUNDS PER SQUARE INCH |
| LAYER COMPOSITION AND LOCATION | INNER PLASTIC, TETRAFLUOROETHYLENE AND INNER BRAIDED FABRIC |
| OPERATING PRESSURE | 5000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | HOSE ASSEMBLY,PTFE,ARAMID FIBER REINFORCEMENT,DYNAMIC BEAM SEAL,5,000 PSI |
| MEASURING METHOD AND LENGTH | 22.75 INCHES NOMINAL OVERALL |
| NOMINAL THREAD SIZE | 0.4375 INCHES ALL ENDS |
| SPECIAL FEATURES | FITTINGS: NUT; 6AL-4V TITANIUM PER AMS 4928 OR AMS 4965;NIPPLE: 6AL-4V TITANIUM PER AMS 4965, AMS 4928 OR 3AL-2.5 PER AMS 4944; SOCKET: 304 CRES PER MIL-T-8504 OR 304 CRES PER AMS 5639; OR AMS-QQ-S-763,321 OR 347 CRES PER MIL-T-8808,TYPE I OR II;HOSE MATERIAL: POLYTETRAFLUOROETHYLENE (PTFE); REINFORCEMENT: ARAMID FIBER WITH INTEGRAL CHAFE PROTECTION |
| SPECIAL TEST FEATURES | ROOM TEMPERATURE BURST PRESSURE: 20,000PSI; HIGH TEMPERATURE BURST PRESSURE: 17,000PSI |
| SUPPLEMENTARY FEATURES | HOSE SIZE: .250"; T THREAD AS8879: .4375-24 UNJS-3B;BEND RADIUS MINIMUM: 1.5";OPERATING PRESSURE: 5,000PSI;PROOF PRESSURE: 10,000PSI;BURST PRESSURE ROOM TEMPERATURE: 20,000PSI;BURST PRESSURE HIGH TEMPERATURE: 17,000PSI |
| THREAD SERIES DESIGNATOR | UNJS ALL ENDS |
| THREAD QUANTITY PER INCH | 24 ALL ENDS |