| END CONNECTION DESIGN | STRAIGHT FIRST END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| BURST TEST PRESSURE | 17000.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | SWIVEL NUT FLARE FIRST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| INSIDE DIAMETER | 0.500 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER SHEET RUBBER AND 3RD LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| OUTSIDE DIAMETER | 0.880 INCHES NOMINAL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | INAVY: HOSE ASSY 55IN |
| MEDIA FOR WHICH DESIGNED | AIR AND HYDRAULIC FLUID AND OIL, LUBRICATING, DIESTER BASE AND WATER SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 55.000 INCHES NOMINAL WORKING |
| MINIMUM INSIDE BENDING RADIUS | 7.000 INCHES |
| NOMINAL THREAD SIZE | 0.750 INCHES FIRST END |
| OPERATING PRESSURE | 4250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| SEAT ANGLE | 37.0 DEGREES AND 45.0 DEGREES FIRST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| SPECIFICATION/STANDARD DATA | SAE 100R2 NATIONAL STD/SPEC |
| TEMP RATING | -40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B FIRST END |
| THREAD DIRECTION | RIGHT-HAND FIRST END |
| THREAD SERIES DESIGNATOR | UNF FIRST END |