| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| MEDIA FOR WHICH DESIGNED | AIR AND |
| HYDRAULIC FLUID AND |
| OIL, LUBRICATING, DIESTER BASE AND |
| WATER SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 31.000 INCHES NOMINAL WORKING |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND |
| 257.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 4250.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 17000.0 POUNDS PER SQUARE INCH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE AND |
| 2ND LAYER WRAPPED RUBBER, SYNTHETIC AND |
| 3RD LAYER BRAIDED STEEL WIRE AND |
| OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| MINIMUM INSIDE BENDING RADIUS | 7.000 INCHES |
| INSIDE DIAMETER | 0.500 INCHES NOMINAL |
| OUTSIDE DIAMETER | 0.880 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| SEAT ANGLE | 37.0 DEGREES AND |
| 45.0 DEGREES 1ST END |
| END CONNECTION DESIGN | ELBOW 1ST END |
| FLOW ANGLE | 90.0 DEGREES 1ST END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| NOMINAL THREAD SIZE | 0.750 INCHES 1ST END |
| THREAD CLASS | 3B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| SPECIFICATION/STANDARD DATA | SAE 100R2 NATIONAL STD/SPEC |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; TWO LAYERS ARE INTERWOVEN WIRE |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | INAVY: HOSE ASSY 31IN |