|
|
|
National Stock Number:
4720-01-540-8639
Federal Supply Class:
4720
National Item Identification Number:
015408639
Description:
HOSE ASSEMBLY,NONMETALLIC
Detail:
A length of nonmetallic hose with fittings on one or both ends. For items without fittings, see HOSE, NONMETALLIC. Excludes HOSE ASSEMBLY, AIR DUCT; and HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
|
Manufacturer Information:
| HI-761-3000 REV H ITEM 16 | 7N931 | HHE SERVICES, INC. | | HI-761-3000-16 | 7N931 | HHE SERVICES, INC. | | HI-761-3100 REV J ITEM 16 | 7N931 | HHE SERVICES, INC. | | HI-761-3100-16 | 7N931 | HHE SERVICES, INC. |
|
Techincal Specification:
| END CONNECTION DESIGN | STRAIGHT 1ST END | | BURST TEST PRESSURE | 14000.0 POUNDS PER SQUARE INCH | | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END | | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END | | CROSS-SECTIONAL SHAPE STYLE | ROUND | | INSIDE DIAMETER | 0.500 INCHES NOMINAL | | INSIDE SURFACE CONDITION | SMOOTH | | LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, SYNTHETIC AND 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE | | PROPRIETARY CHARACTERISTICS | PACS | | MAXIMUM OPERATING PRESSURE | 3500.0 POUNDS PER SQUARE INCH | | MEASURING METHOD AND LENGTH | 30.000 INCHES NOMINAL EXCLUDING END FITTINGS | | MEDIA FOR WHICH DESIGNED | WATER AND OIL, LUBRICATING, DIESTER BASE AND HYDRAULIC FLUID AND GAS SINGLE RESPONSE | | MINIMUM INSIDE BENDING RADIUS | 7.000 INCHES | | NOMINAL THREAD SIZE | 0.750 INCHES 1ST END | | OUTSIDE DIAMETER | 0.970 INCHES NOMINAL | | SEAT ANGLE | 37.0 DEGREES 1ST END | | TEMP RATING | -65.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE | | THREAD CLASS | 2B 1ST END | | THREAD DIRECTION | RIGHT-HAND 1ST END | | THREAD QUANTITY PER INCH | 16 1ST END | | THREAD SERIES DESIGNATOR | UN 1ST END |
|
|