| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| THREADED INTERNAL TUBE 2ND END |
| MEDIA FOR WHICH DESIGNED | AIR AND |
| HYDRAULIC FLUID SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 48.000 INCHES NOMINAL WORKING |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -70.0 DEG FAHRENHEIT AND |
| 212.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER POLYESTER |
| MINIMUM INSIDE BENDING RADIUS | 1.750 INCHES |
| INSIDE DIAMETER | 0.250 INCHES NOMINAL |
| OUTSIDE DIAMETER | 0.510 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| CONNECTION STYLE | SWIVEL NUT, GASKET SEAL 1ST END |
| SWIVEL NUT FLARE 2ND END |
| SEAT ANGLE | 37.0 DEGREES 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| ELBOW 2ND END |
| FLOW ANGLE | 45.0 DEGREES 2ND END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| UNF 2ND END |
| NOMINAL THREAD SIZE | 0.562 INCHES 1ST END |
| 0.438 INCHES 2ND END |
| THREAD QUANTITY PER INCH | 20 2ND END |
| THREAD CLASS | 2B 1ST END |
| 2B 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| RIGHT-HAND 2ND END |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.250 INCHES 2ND END |
| NOMINAL INSIDE DIAMETER HOSE ACCOMMODATED | 0.250 INCHES 2ND END |
| CRITICALITY CODE JUSTIFICATION | FEAT |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-PLASTIC; WEAPON SYSTEM ESSENTIAL; ELASTOMERIC CORE; CLEAN AND CAP ENDS; ATTACHED MARKING PLATE |