| END CONNECTION DESIGN | STRAIGHT FIRST END |
| END CONNECTION DESIGN | ELBOW SECOND END |
| END FLANGE CONSTRUCTION | SOLID FIRST END |
| END FLANGE CONSTRUCTION | SOLID SECOND END |
| BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | PLAIN FIRST END |
| CONNECTION STYLE | PLAIN SECOND END |
| CONNECTION TYPE | PLAIN FACE FLANGE FIRST END |
| CONNECTION TYPE | PLAIN FACE FLANGE SECOND END |
| CRITICALITY CODE JUSTIFICATION | FEAT |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FEATURES PROVIDED | NUTS DRILLED FOR LOCKWIRE |
| FLANGE OUTSIDE DIAMETER | 0.925 INCHES NOMINAL FIRST END |
| FLANGE OUTSIDE DIAMETER | 1.200 INCHES NOMINAL SECOND END |
| FLANGE STYLE | ROUND W/ OUT BOLT HOLES FIRST END |
| FLANGE STYLE | ROUND W/ OUT BOLT HOLES SECOND END |
| FLANGE THICKNESS | 0.100 INCHES NOMINAL FIRST END |
| FLANGE THICKNESS | 0.100 INCHES NOMINAL SECOND END |
| FLOW ANGLE | 90.0 DEGREES SECOND END |
| HYDROSTATIC TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.391 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| OUTSIDE DIAMETER | 1.015 INCHES NOMINAL |
| MEASURING METHOD AND LENGTH | 27.750 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | REFRIGERANT 13 SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 5.750 INCHES |
| OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| SPECIAL FEATURES | WEAPON SYSTEM ESSENTIAL; UNION NUTS WITH LOCKWIRE HOLES; .938-16 UN 2B AND 1.25-12 UNF 2B THREADS; SEALS TO O'RING FACE SEAL UNION THREADPIECE |
| TEMP RATING | -67.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE |